24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

01 Ram 2500 CTD questions

Thread Tools
 
Search this Thread
 
Old 11-20-2006 | 09:00 PM
  #16  
sluggo42's Avatar
Registered User
 
Joined: Nov 2006
Posts: 319
Likes: 0
From: Camarillo
hmmm..

i'm thinking that
I got a good deal with my
"00" LB 2500 2WD SLT Laramie loaded with every option that was available with 191K miles for $9350
Camper special, leather with heated seats, Infinity premium stereo, BW flushmount hitch, HD suspension and sway bars, new VP44 and lift, rebuilt tranny, etc...
KEEP LOOKING! there are good deals out there for a patient person. I must have looked at over 100 trucks..
Old 11-25-2006 | 10:29 AM
  #17  
nirion's Avatar
Thread Starter
Registered User
 
Joined: Apr 2003
Posts: 478
Likes: 0
From: central OH
Ok, I went and drove the truck again, this time for about 100 miles. Few more questions:
1)Does the 47RE have a higher (numerically lower) overdrive than the NV5600? Because I didn't think the 4.10s were that bad going 65mph.
2)Someone posted earlier that 172k is too late to upgrade the tranny with just new tc & vb, thoughts on this? I am only planning on adding about 100hp or so (quad XZT and then maybe something else later) but want a firmer shift.
3)With 172k miles is there anything I should plan on replacing soon, maintenance wise. It has new LP and IP.
The dealer came back with a better price, and since it was late last night, I didn't get paperwork done, but if everything comes back ok I will be getting it.

Thanks,
Nick
Old 11-25-2006 | 10:55 AM
  #18  
Charlie8301's Avatar
Registered User
 
Joined: Feb 2004
Posts: 629
Likes: 0
From: south west, Michigan
1) I think OD in the auto is like .56, which is higher then the 5 speed or the 6 speed
Old 11-25-2006 | 11:33 AM
  #19  
Cummins Freak's Avatar
Registered User
 
Joined: Oct 2004
Posts: 1,003
Likes: 0
From: Williston, ND
Originally Posted by RJF
4.10's suck in anything that isn't pulling daily, and heavy at that. They are even worse when paired with the auto as they don't load the motor very well compared to the 3.55's.
4.10's make the truck feel almost like the converter is very loose.

.
your crazy.....my dad had a 97 CTD with 3.55's and that think was a dog yeah it was stock but when i got mine still stock with 4.10's we couldn't believe the difference way better driveability. sure i cant go 75-80 without getting worse millage but i can cruse at 70 all day and pull 15-18 mph hec k dang near 20 at 65mph with a tail wind. i would never go back to 3.55's also having the 4:10's i think is what is saving my stock trans with all my mods
Old 11-26-2006 | 12:31 PM
  #20  
Codyboy's Avatar
Registered User
 
Joined: Oct 2006
Posts: 39
Likes: 0
i am maybe getting 16mpg on my 2002 with a 6spd and 3.55's. Its city driving mostly. But on the highway the rpms are a bit high for my liking. I am around the same rpms as you with the 3.55's
Old 11-26-2006 | 01:01 PM
  #21  
SIXSLUG's Avatar
Registered User
 
Joined: May 2006
Posts: 5,576
Likes: 152
From: Pacific NW, B'ham, Kalispell MT
It took me a year and a half to find the right truck. Be patient, it's out there!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MikeRP
3rd Generation Ram - Non Drivetrain - All Years
79
11-21-2016 10:19 PM
Donmacky
4th Gen Ram -Non Drivetrain- 2010 and Up
3
02-01-2014 06:07 PM
marksblaster
2nd Gen. Dodge Ram - No Drivetrain
4
10-27-2012 11:26 AM
adamkn
3rd Generation Ram - Non Drivetrain - All Years
4
03-29-2005 02:48 PM



Quick Reply: 01 Ram 2500 CTD questions



All times are GMT -5. The time now is 11:32 AM.