Window regulator by pass?
#1
Registered User
Thread Starter
Window regulator by pass?
Hello, is there a way to manually lower the window? I have power windows and the window is stuck upwards. Let me know!
#3
Registered User
Thread Starter
#4
Registered User
With the motor out there might still be spring tension in the regulator.....not sure of the 90's design though?
Was the motor dead, or was the window not moving even though motor is working?
Was the motor dead, or was the window not moving even though motor is working?
#5
Registered User
Thread Starter
Everything is good in the door. I have my entire truck apart so the door is laying on my work table. Unfortunately this door always made a whistle sound and come to find out the door has serious damage to it. I'm sourcing new doors ATM so I'm hoping to get these gutted. The driver side door is rusted through and the passenger side is rust free but crooked. Go figure
#6
Administrator
The windows in my 90 come down with a little spring tension with the motor out...Mark
Thread
Thread Starter
Forum
Replies
Last Post
bajadreamers
2nd Gen. Dodge Ram - No Drivetrain
7
07-22-2009 07:02 PM
jivemother
3rd Generation Ram - Non Drivetrain - All Years
4
07-29-2008 09:55 PM
kas83
2nd Gen. Dodge Ram - No Drivetrain
2
09-18-2007 02:42 PM