Where did i go wrong
#1
Registered User
Thread Starter
Join Date: Sep 2005
Location: Texas
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Where did i go wrong
Just shelled out another flex in my 92.Bought it direct from cummings.Installed it about 2 months ago.every thing looked good going back together dont know what i could have missed. any one have any ideas?
#2
Registered User
Join Date: Sep 2004
Location: INWOOD, West 'BY GOD' Virginia
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
Are you talking about the flex plate?
If so get one from a 95 or newer- stronger- part # is in the tech section +/-$95.00
Hope this helps
Michael
If so get one from a 95 or newer- stronger- part # is in the tech section +/-$95.00
Hope this helps
Michael
#3
Patron Saint of 1st gens
Join Date: Jun 2002
Location: British Columbia, Canada
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
I agree with '92 the original ones are ok if you leave the HP alone but they soon pack it in when you upgrade, even the modestly modified trucks end up with trouble.
You can get an even beefy'r unit from PDR. They have them and I'm running one in mine...so far no complaints...
pb..
You can get an even beefy'r unit from PDR. They have them and I'm running one in mine...so far no complaints...
pb..
Thread
Thread Starter
Forum
Replies
Last Post
Tengu
Performance and Accessories 2nd gen only
4
03-01-2004 11:57 PM
PistolWhipt
Suggestions, Comments and Site Questions
4
03-23-2003 08:41 AM