1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

What a Manuel Gage reading normal reads as

Thread Tools
 
Search this Thread
 
Old 12-05-2012 | 06:54 PM
  #1  
MVRAM's Avatar
Thread Starter
Registered User
 
Joined: Dec 2010
Posts: 5
Likes: 0
What a Manuel Gauge reading normal reads as

I noticed the other day that my oil pressure gauge was reading low so when I get time I’m going to put a Manuel gauge on it to see what it reads. Does anyone know what a typical manual gauge reading is? Thanks For the help!!
Old 12-05-2012 | 09:59 PM
  #2  
d22019's Avatar
Registered User
 
Joined: Jul 2007
Posts: 499
Likes: 1
From: Texas
Mine always reads 25 idle hot, 50 above idle hot.
Old 12-05-2012 | 11:16 PM
  #3  
j_martin's Avatar
Registered User
 
Joined: Nov 2011
Posts: 4,479
Likes: 209
From: Isanti, MN
The Dodge dash gauge has little to do with reality, other than if it's in the middle band it's probably OK.
Old 12-05-2012 | 11:21 PM
  #4  
NE frmhnd's Avatar
Registered User
 
Joined: Nov 2009
Posts: 1,955
Likes: 2
From: McCook, Nebraska
Your truck's 20+ years old. A fresh sending unit could make a difference in your oil pressure. As long as it's up in the middle it's good, I gained a line when I replaced the original sending unit.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mullishacrew
1st Gen. Ram - All Topics
4
03-18-2012 01:41 PM
Convicted1
3rd Gen Engine and Drivetrain -> 2003-2007
4
08-27-2007 01:34 AM
03qclb5spd
3rd Gen High Performance and Accessories (5.9L Only)
7
04-04-2007 12:42 AM
Ghostrider
Towing and Hauling / RV
1
03-24-2005 11:37 PM
pancho05
24 Valve Engine and Drivetrain
1
08-18-2003 01:20 PM




All times are GMT -5. The time now is 04:25 PM.