What did you do to your Gen 1 today?
#91
Registered User
Broke mine today ! Water/meth turned on by it self on the way to work full bore, looked out the mirror to change lanes and had a huge white cloud pouring out the exhaust. I thought might have lost an injector but upon stopping it laterally stopped the motor. Turned the key on and heard the pump running, switch was off so I cut the power wire to it. Put my ratchet on the crank and sure enough it was hydro locked. I let it cool down for about 30 min and tried again going back and forth, got it to move freely so I unplugged the fuel solenoid and cranked it for a few revolutions. Plugged it back in and started it to a while to clean up the smoke, but still had a miss and slight "tick" . So I pulled the radiator cap and sure enough it was pushing air in the cooling system. At the very least head gasket, possible I scuffed a piston from the blow by it has now and the tick.
#92
Registered User
Broke mine today ! Water/meth turned on by it self on the way to work full bore, looked out the mirror to change lanes and had a huge white cloud pouring out the exhaust. I thought might have lost an injector but upon stopping it laterally stopped the motor. Turned the key on and heard the pump running, switch was off so I cut the power wire to it. Put my ratchet on the crank and sure enough it was hydro locked. I let it cool down for about 30 min and tried again going back and forth, got it to move freely so I unplugged the fuel solenoid and cranked it for a few revolutions. Plugged it back in and started it to a while to clean up the smoke, but still had a miss and slight "tick" . So I pulled the radiator cap and sure enough it was pushing air in the cooling system. At the very least head gasket, possible I scuffed a piston from the blow by it has now and the tick.
#93
Registered User
#94
Registered User
Join Date: Dec 2008
Location: Morgan,UT
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
#95
Registered User
#96
Registered User
Yesterday I spent $25 on bolts. then it started raining. And is still raining.
#97
Registered User
I got some time to work on my front spring hangers. I got the top Plate and outside side plates tacked together so I could use 1/2-13 all thread to mock up where the inside plates will sit. Now I can cut the ribs and shorten the inside plates as per change in design. Gotta love making your own parts.
#98
Registered User
Join Date: May 2006
Location: Susanville, California
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Tig welded frame and reinforced where the power steering pump mounts. Tig welded the power steering pump adapter. Rebuilt front brakes. Very nice to have my lift back in service.
Mike
Mike
#99
Registered User
Join Date: May 2006
Location: Susanville, California
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Hi All,
Took out the interior, to include the headliner , on the 92. The new carpet will be here on Monday. I also replaced all of the door and window weatherstrip with a kit I bought for the "93,( May it rest in Peace ), 6 years ago. I have installed the CPS delete kit and have it running great. Now, I will finish the flatbed I made for the "93 with the liftgate and get it on. The flatbed was from a GMC, but very easy to fabricate and fit to my Dodge.
More to come, so stay tuned to this station.
Mike
Took out the interior, to include the headliner , on the 92. The new carpet will be here on Monday. I also replaced all of the door and window weatherstrip with a kit I bought for the "93,( May it rest in Peace ), 6 years ago. I have installed the CPS delete kit and have it running great. Now, I will finish the flatbed I made for the "93 with the liftgate and get it on. The flatbed was from a GMC, but very easy to fabricate and fit to my Dodge.
More to come, so stay tuned to this station.
Mike
#100
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
After temporarily repairing my fusible link issue the other day, I haven't done much to the brick. Today, otoh, I spent about 4 hours in the brisk spring WINDY day moving my secondary fuse panel I have under the hood, over just a bit, to create room for accessing all my fusible links and install my new maxi fuses, replacing them and hopefully permanently resolving this electrical nightmare that Chrysler gave us back in the 90's.
This little project should be interesting.....
This little project should be interesting.....
#102
Registered User
I am trying to finish up my 24V intercooler with 2nd gen boost tubes, boots, 24V intake horn and a HX-35 turbo install on my '85 crew with a NON I/Ced 12V under the hood.
I did it roughly like it was done in the sticky, but ditched the A/C condenser, so I could inset the intercooler more.
I also modified the lower intercooler brackets to get things way from the valence and grille so I had less to trim.
I spent 2 hrs modifying / cutting / welding the secondary hood latch as it was interfering with the big Intercooler, and I am still not happy with it yet.
I want to get it ready, as the snow is starting to melt around here, and I want to be able to drive it in a few weeks/month!
I did it roughly like it was done in the sticky, but ditched the A/C condenser, so I could inset the intercooler more.
I also modified the lower intercooler brackets to get things way from the valence and grille so I had less to trim.
I spent 2 hrs modifying / cutting / welding the secondary hood latch as it was interfering with the big Intercooler, and I am still not happy with it yet.
I want to get it ready, as the snow is starting to melt around here, and I want to be able to drive it in a few weeks/month!
#103
Not the best idea, but a buddy at work had a p-pumper with a 62mm charger, so I told him I could dust him off with the 'ol VE, 62 charger to 62 charger. Nope, he made 501 to my 452 (inertia dynojet). Oh well, there's always cheating (nitrous)
The challenge was fuel to fuel though, so I lost fair and square.
Felt good to get the truck up and going again though. Even packed ice on the crossover as a ghetto intercooler, but it didn't seem to do much. I'm thinking the P must just have more injection pressure.
Anyways, it was fun!
The challenge was fuel to fuel though, so I lost fair and square.
Felt good to get the truck up and going again though. Even packed ice on the crossover as a ghetto intercooler, but it didn't seem to do much. I'm thinking the P must just have more injection pressure.
Anyways, it was fun!
#104
Registered User
I love the icing down the crossover pipe trick.
Just like the old drag guys icing down the gas lines to the Holley carb[s] for races.
Just like the old drag guys icing down the gas lines to the Holley carb[s] for races.
#105