What did you do to your Gen 1 today?
The following 3 users liked this post by BHD:
#8372
Registered User
BHD,
That grease doesn't look much like the crimson red grease I use...Yuck
Should be good to go for years to come now.
That grease doesn't look much like the crimson red grease I use...Yuck
Should be good to go for years to come now.
The following users liked this post:
FrustratedFirst (07-22-2022)
The following 2 users liked this post by BHD:
nothingbutdarts (07-06-2022),
oliver foster (07-06-2022)
The following users liked this post:
FrustratedFirst (07-22-2022)
The following users liked this post:
Rug_Trucker (07-07-2022)
#8377
Registered User
Yesterday, new multi switch, volt reg, air cleaner and a tear down and cleanup assessment of the gauge cluster for next steps. I will get it apart later to change the fuel gauge, get new OD gears in, and paint the needles. Bench test showed speedo fine so I went underneath and changed out the almost new sending unit on the T case; bad on my for once again trusting new senders and jumping to the conclusions.
Today (or maybe tomorrow), valve adjustment and oil change.
Today (or maybe tomorrow), valve adjustment and oil change.
The following users liked this post:
nothingbutdarts (07-07-2022)
#8379
Registered User
New automatic belt tensioner and drivers side door lock mechanism; it was a long wait for one of them. Good to have a door that shuts right and doesn’t make a hassle to open after being locked.
#8380
Was the old heat exchanger leaking?
The following users liked this post:
nothingbutdarts (07-12-2022)
The following 2 users liked this post by edwinsmith:
MoPowa (07-12-2022),
Sheep Herder (07-11-2022)
The following 2 users liked this post by Fordzilla:
edwinsmith (07-11-2022),
MoPowa (07-12-2022)
The following users liked this post:
nothingbutdarts (07-12-2022)
#8385
Got my truck back from the shop with good brakes the other day. They bled the system with a pressure bleeder and got any air out of the system. Now just need to get it paperwork legal and inspected then I can finally drive it again.
The following 2 users liked this post by Shelby/Dakota:
nothingbutdarts (07-20-2022),
thrashingcows (07-20-2022)