VE rebuild with pics Look inside
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Jonesboro, TEXAS
Posts: 1,269
Likes: 0
Received 0 Likes
on
0 Posts
VE rebuild with pics Look inside
I am going to do a right up on how to go threw your VE with tons of pics and step-by-step of how to do it and what to watch out for and how to get more power out of it. I have been into one a few times before and its not as bad as many people think. This should also help any one with a leaky pump that needs to reseal it. I don't have time tonight but here is a preview of what's to come.
#4
Registered User
Trending Topics
#10
Registered User
Join Date: May 2004
Location: Golden, Colorado
Posts: 2,867
Likes: 0
Received 0 Likes
on
0 Posts
Well for starters the governor assembly is still in the case, so all the parts that you can't get out with it still installed are still in there. Roller ring, vein pump, timing piston, and of course the drive shaft is still in the case.
Did I miss anything?
Did I miss anything?
#14
Registered User
Thread Starter
Join Date: Dec 2006
Location: Jonesboro, TEXAS
Posts: 1,269
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I haven't done it yet this is the first time I have been on in 5 Days and it will only be for a min and these things don't right them selves. I got very busy after the 1st post. Sorry to get every ones hopes up but i will do It as soon as I can.