Vacuum pump oil leak.
#16
Registered User
Join Date: Sep 2002
Location: Wichta,Ks
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
I'm curious, the repair you guys are talking about is just for an oil leak and not in relation to low vacume condition ? My truck has the brake light comming on and since the vac pump has an oil leak and the light is comes on intermittently I'm thinking it's running low on vacume. I was planning on running a vac. check but I figured I'd just pull it and replace seals since it's leaking oil anyway. Thanks
ramguy
ramguy
#18
Registered User
Join Date: Sep 2002
Location: Wichta,Ks
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Monty;
I guess I'll run a vac. test and see what the readings are, I've wondered if the vac. sensor (sw) isn't bad. I haven't noticed any pwr bracke or assist problems. The damper doors on the heat & air seem to be working fine, may be the sensor. Have a good day.
ramguy
I guess I'll run a vac. test and see what the readings are, I've wondered if the vac. sensor (sw) isn't bad. I haven't noticed any pwr bracke or assist problems. The damper doors on the heat & air seem to be working fine, may be the sensor. Have a good day.
ramguy
#19
Registered User
Originally posted by Monty
TurboAZ, what supplier did you get the seal, and o-rings from? In the future, I plan on fixing mine right.
TurboAZ, what supplier did you get the seal, and o-rings from? In the future, I plan on fixing mine right.
You can find them here.
http://www.intsealpack.com
Hope this helps.
#21
Registered User
Join Date: Jan 2004
Location: Joliet,IL
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys,
Just did mine today because I needed to change the PS pump(reman'ed,autostoned-$62.00).
Boy,nothing like PS when you have a 1000lb motor over them steering wheels...I'll tell ya'...
I got the "Int Seal & Packing " oil seal part #28X38X7DN from a place called Motion Industries right here in town.
They had it for me the day after I ordered it.
They matched the O-ring for me today...the package says...
1/16 x 2-1/8 x 2-1/4
The package they sold me had 5 O-rings in it...and,as you guys know,I only needed 1...
If anyone needs one of those extra O-rings,send me a "self-abused stomped envelope" and I'll be glad to send one along...on the "NC" plan(no charge,ya'know?).
Send me a PM and let me know your gonna' speak for one,and I'll let everyone know when they're all gone.
Thanks for all the help you guys have given me...
Vinny
Just did mine today because I needed to change the PS pump(reman'ed,autostoned-$62.00).
Boy,nothing like PS when you have a 1000lb motor over them steering wheels...I'll tell ya'...
I got the "Int Seal & Packing " oil seal part #28X38X7DN from a place called Motion Industries right here in town.
They had it for me the day after I ordered it.
They matched the O-ring for me today...the package says...
1/16 x 2-1/8 x 2-1/4
The package they sold me had 5 O-rings in it...and,as you guys know,I only needed 1...
If anyone needs one of those extra O-rings,send me a "self-abused stomped envelope" and I'll be glad to send one along...on the "NC" plan(no charge,ya'know?).
Send me a PM and let me know your gonna' speak for one,and I'll let everyone know when they're all gone.
Thanks for all the help you guys have given me...
Vinny
Thread
Thread Starter
Forum
Replies
Last Post
coalburner_77
2nd Gen. Dodge Ram - No Drivetrain
17
11-07-2018 07:36 PM
jimbo486
1st Gen. Ram - All Topics
14
05-08-2016 06:07 PM