Twins Finally Installed!!!!!
#6
Registered User
Thread Starter
Join Date: May 2009
Location: Indiana
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
well The 3B is a 76mm and the Hx is a 56mm, Boost I have regulated down to 55psi for now. Egts get pretty warm bout 1300 on a hard pull, goin to have to install the P/S intercooler. Seat of the paints is great but need more fuel(perhaps a p-pump,lol)
Trending Topics
#8
Registered User
Join Date: Jan 2008
Location: Quinton, New Jersey (middle of nowhere)
Posts: 7,547
Likes: 0
Received 2 Likes
on
2 Posts
Wait so with an I/C the cold air coming out of the HT3B would go through the intercooler ??
I'm confused as to why your putting 55 psi of air through an HX35 thats just gonna restrict it down.
Elaborate
I'm confused as to why your putting 55 psi of air through an HX35 thats just gonna restrict it down.
Elaborate
#9
Registered User
EGT's at around 1300? that's not bad at all! but yes, an intercooler should drop that around 100*. could maybe do a 60mm upgrade on the hx? just a thought. don't those have to be machined or something to receive the new wheel?
#15
Registered User
Join Date: Nov 2008
Location: Goldendale, WA
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Looks very nice- I like the layout. Did you have to move anything to get the 3b located there? Also is the hot pipe being longer than normal going to effect performance at all?