took some pictures
#16
alwaysonDTR
Thread Starter
Join Date: Dec 2007
Location: Keizer, oregon
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
#20
alwaysonDTR
Thread Starter
Join Date: Dec 2007
Location: Keizer, oregon
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
#21
Best Paint (Getrag category)
Join Date: Dec 2007
Location: Eagle Ne
Posts: 2,122
Likes: 0
Received 0 Likes
on
0 Posts
I'll be running a set of 33/12.5/16 Interco STS's and they are just a smidge bigger than the 285s
The magic crawl ratio is about 15-1
2nd low is 21.15
3rd low is 11.61
1st high is 19.91
This is all figured with an NV4500 also, so the rag shouldn't be to far off from these figures
What are the gear ratios in the rag anyway
The magic crawl ratio is about 15-1
2nd low is 21.15
3rd low is 11.61
1st high is 19.91
This is all figured with an NV4500 also, so the rag shouldn't be to far off from these figures
What are the gear ratios in the rag anyway
#22
Registered User
Join Date: May 2004
Location: Golden, Colorado
Posts: 2,867
Likes: 0
Received 0 Likes
on
0 Posts
So how much do you have to slip the clutch to get the sled moving in 2nd lo?
Also the gear ratios in the rag' are pretty close to the nv, they may be just a little lower as I know the split between 3rd and 4th is larger than the nv.
Also the gear ratios in the rag' are pretty close to the nv, they may be just a little lower as I know the split between 3rd and 4th is larger than the nv.
#24
Best Paint (Getrag category)
Join Date: Dec 2007
Location: Eagle Ne
Posts: 2,122
Likes: 0
Received 0 Likes
on
0 Posts
The ratios for an NV are
5.61
3.04
1.67
1.0
.76
#27
alwaysonDTR
Thread Starter
Join Date: Dec 2007
Location: Keizer, oregon
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
not much just like takeing off with a load in 1st high
#30
Best Paint (Getrag category)
Join Date: Dec 2007
Location: Eagle Ne
Posts: 2,122
Likes: 0
Received 0 Likes
on
0 Posts
How many times you hooked that thing now?
Most of my southern tracks are real sticky clay, they'll hold a lot of power but you see lots of breakage then our northern tracks are right in the middle of loose and sticky kind of a sandy clay. Pretty good track prep around here too only got a couple of junk tracks
Most of my southern tracks are real sticky clay, they'll hold a lot of power but you see lots of breakage then our northern tracks are right in the middle of loose and sticky kind of a sandy clay. Pretty good track prep around here too only got a couple of junk tracks