Third Gen wheels
#1
Registered User
Thread Starter
Third Gen wheels
My friend let me take home his third gen brushed aluminum wheels to see if I would want then on my "Authentic" 1st gen, but the offset looks wrong. Will they fit?
#3
waldo,
What do you mean by too much work. I've got a set of 16" aluminum wheels that I bought recently and the fronts hit the brake caliper & I think the tie-rod end as well. Are you aware of a work around?
What do you mean by too much work. I've got a set of 16" aluminum wheels that I bought recently and the fronts hit the brake caliper & I think the tie-rod end as well. Are you aware of a work around?
#4
Registered User
3rd gen wheels are not a bolt up. I bough a set with tires from a member. The back fit fine, but up front the wheel hit the tierod end. I don't want to fuss around with spacers---the front end is already hard enough of wheel bearings as it is.
Thread
Thread Starter
Forum
Replies
Last Post
gilbertsdodge
General Diesel Discussion
4
10-22-2009 04:06 AM
conchfarmer
3rd Gen High Performance and Accessories (5.9L Only)
17
02-13-2008 04:51 PM