Tach magnet issues?
05-12-2012, 05:42 PM
#2
Registered User
When I installed my fluid damper I had to redo the magnets. I bought some 3/8 round rare earth magnets...10 off e-bay for cheap....then cleaned and epoxied them to the new balancer. Then I had to modify the pick-up location for the bigger diameter damper.
Was into it for under $15. Much less then a "new" magnet kit from Isspro..or whom ever..at $50+.
Here's what my bracket re-location looked like.
used an old sink faucet retainer bracket. Been on there over a year with no problems.
Was into it for under $15. Much less then a "new" magnet kit from Isspro..or whom ever..at $50+.
Here's what my bracket re-location looked like.
used an old sink faucet retainer bracket. Been on there over a year with no problems.
Thread
Thread Starter
Forum
Replies
Last Post
360ramcharger
12 Valve Engine and Drivetrain
4
06-29-2004 07:57 AM