1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Source: Rubber Fender Lip?

Thread Tools
 
Search this Thread
 
Old 01-07-2008 | 12:20 PM
  #1  
Caver Dave's Avatar
Thread Starter
Registered User
 
Joined: Apr 2007
Posts: 393
Likes: 0
From: Piedmont of NC
Source: Rubber Fender Lip?

The drivers front fender had been replaced by the PO (said a teenager hit her) and the black rubber(?) edging that goes around the fender lip is missing. Not that it's a showtruck or anything , but I'd like to find one if possible...

Any sources or ideas?
Old 01-07-2008 | 12:37 PM
  #2  
haloman's Avatar
Chapter President
 
Joined: May 2002
Posts: 3,529
Likes: 0
JcWhitney or eBay.
Old 01-07-2008 | 05:12 PM
  #3  
Caver Dave's Avatar
Thread Starter
Registered User
 
Joined: Apr 2007
Posts: 393
Likes: 0
From: Piedmont of NC
I was afraid of that! Any idea what they're actually called?

I saw them at JCW, but only in "polished SS"... not the BLACK rubber/vinyl
Old 01-07-2008 | 06:39 PM
  #4  
wollfgang's Avatar
Registered User
 
Joined: May 2003
Posts: 43
Likes: 0
From: Duluth, MN
I also am looking for one for passenger side 93 front wheel well. I do believe when I had it in a body shop they said could get one from dodge but I don't remember how much it was and it was a couple years ago so they might not even have any more. I might just call tomorrow and see if I can get one and will let you know if and cost.

gary
Old 01-07-2008 | 07:03 PM
  #5  
rlyons's Avatar
Registered User
 
Joined: Dec 2005
Posts: 701
Likes: 32
From: Mossy Head, FL
They have the fronts here but I think the rears are no longer available.
http://www.trademotion.com/partlocat...93&catalogid=2
Old 01-08-2008 | 08:15 AM
  #6  
Caver Dave's Avatar
Thread Starter
Registered User
 
Joined: Apr 2007
Posts: 393
Likes: 0
From: Piedmont of NC
Thanks bro... maybe it's time to go SS!
Old 01-08-2008 | 09:11 AM
  #7  
archer39's Avatar
Chapter President
 
Joined: Oct 2007
Posts: 2,155
Likes: 2
From: Pottstown, PA
i may have one, i will check today and get back to you
Old 01-08-2008 | 11:15 AM
  #8  
Chrisreyn's Avatar
DTR's Night Watchman & Poet Laureate
 
Joined: Jun 2004
Posts: 2,156
Likes: 1
From: Lyndon KS
are these the parts you need? , Chrysler calls them "cushions" and if Archer doesnt have them, you can get them from chryslerpartsdirect-dot-com, but they seem awfully expensive...
Old 01-08-2008 | 03:45 PM
  #9  
wollfgang's Avatar
Registered User
 
Joined: May 2003
Posts: 43
Likes: 0
From: Duluth, MN
I called dodge here and can get them but they think they are made of gold parts guy asked if I was sitting down before he told me " $220.00 " each and could get all 4 for a measly $880.00. I didn't even ask how much the strips on the fenders, doors, cab, and box were. If I don't find a used one will be selling the rest of it off mine and fill the holes and paint. **** never should have hit that deer and didn't even get to keep it the DNR comes and takes them to the county work farm and are butchered for meat for inmates.
Old 01-08-2008 | 08:02 PM
  #10  
Fred Swanson's Avatar
Registered User
 
Joined: Apr 2002
Posts: 685
Likes: 0
From: Waddell, AZ
There's a few trucks in the classifieds being parted, at least one I think has the fender moulding. Can't hurt to ask one of them.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Drivesmopars2
Performance and Accessories 2nd gen only
5
01-17-2016 01:32 PM
SoTexRattler
12 Valve Engine and Drivetrain
6
04-26-2010 12:18 PM
Fallfork
24 Valve Engine and Drivetrain
4
04-07-2008 01:10 PM
TurboTed
3rd Generation Ram - Non Drivetrain - All Years
4
03-23-2008 12:58 AM
ImpulseHydro
3rd Gen Engine and Drivetrain -> 2003-2007
6
10-05-2007 08:04 PM




All times are GMT -5. The time now is 05:46 AM.