Smokeys Fuel Pin
#2
I Played With My Stock One And Am Pleased With It. I Only Ground On The Top Half Of The Cone(the Deepest Part) . I Cut Until The Thinnest Part Was About Half Is Original Thickness, Then Polished It Up With 400 Grit Emory Cloth. Hope This Helps.
Thread
Thread Starter
Forum
Replies
Last Post
gaberichison
1st Gen. Ram - All Topics
12
12-21-2014 12:21 PM
Cowboy_Customs
1st Gen. Ram - All Topics
17
10-18-2011 01:46 AM