91.5 beater

How hard are they to install and how much more ride height do they give you?

TJE

I have them, and they are great IMO. They are not that hard to install. There is an article somewhere here on the site that tells how to do the install. I just followed that, and had no problems. If my memory is correct they give about 2" above the stock ride. Hope this helps, Tony

91.5 beater

Thanks i will definatly do that cause the suspension on the front of my truck is too soft and worn out

TJE

I need to qualify one thing. The stock springs new are 13.?? inches in height. The severe duty are 15.?? in height. This is before they are installed.

Good luck, Tony

pwrtripls1

Sounds like exactly what I need. Can one of you guys give me a PN and place to buy a set.

TJE

I went to napa....their on line website, and looked them up. I forget right now the PN, and the price. They will tell you on the site the height of each paticular set of springs you're looking at.

Good luck, Tony

redneck2thamax

the springs only cost bout 160 for a pair. i put em in my truck and they did a lot of good. raised my truck up. i rebuilt my front end 3 times and it finally isn't sagging.
_______________
1989 d250 diesel 2wd straight pipe, 176k runs strong, 4:10 gears