Reverse Rotion Steering Box
#152
Registered User
#154
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
Boneyard is the only place you will find one, unless you buy a whole parts truck, just for it...
There may be someone here who can help you out, but they are cherished pieces.
#155
I think I have come across one, so I am trying to get the part # confirmed before I spend money on a reverse rotation steering box. The # on my pitman arm is a little hard to see, I have #3496984-16-65.
#156
My pitman arm has 4 flat spots in the bore at the steering box end with 7 splines between each flat spots for a total of 28 splines. The bore at the steering box end is 1 1/8" from flat spot to flat spot, bore at drag link end is 3/4". The drop is 2 3/8".
#157
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
Call redheads or powersteering.com to confirm fit on the gear side. The draglink specified in the rr builds can be found online. If both ends fit, the drop and length I can measure for you on mine
#160
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
Center to center of each hole is approximately 6.5". Total drop is approximately 2.5"
The following users liked this post:
juggernautt (10-21-2017)
Thread
Thread Starter
Forum
Replies
Last Post
04ctd
3rd Gen High Performance and Accessories (5.9L Only)
2
10-05-2006 08:27 PM
LanceK
3rd Generation Ram - Non Drivetrain - All Years
13
07-14-2006 08:08 PM
unioncreek
12 Valve Engine and Drivetrain
3
06-29-2005 02:00 PM