Removing power steering pump and vacuum pump, 89
#16
Registered User
Thread Starter
Join Date: Nov 2007
Location: Maine
Posts: 1,816
Likes: 0
Received 0 Likes
on
0 Posts
I know what you mean. I was looking through the holes just challenging myself to figure it out. I was close but not quite dead on....
Got it all back on and took it for a ride. I thought I still had a foaming problem even after going hard over to hard over several times with the front end in the air. Turns out it was just some air still in the lines, a few bumps later it was gone going down the road and swallowed up a bunch more P/S fluid. I topped it off last night and took it for a ride again today to town. Nice to have powersteering at idle again, and no foaming. Thanks for the help fellahs!
Got it all back on and took it for a ride. I thought I still had a foaming problem even after going hard over to hard over several times with the front end in the air. Turns out it was just some air still in the lines, a few bumps later it was gone going down the road and swallowed up a bunch more P/S fluid. I topped it off last night and took it for a ride again today to town. Nice to have powersteering at idle again, and no foaming. Thanks for the help fellahs!
Thread
Thread Starter
Forum
Replies
Last Post
coalburner_77
2nd Gen. Dodge Ram - No Drivetrain
17
11-07-2018 07:36 PM
jimbo486
1st Gen. Ram - All Topics
14
05-08-2016 06:07 PM
amartinson
24 Valve Engine and Drivetrain
0
05-04-2003 01:55 PM