Part # needed...
#1
Registered User
Thread Starter
Join Date: Aug 2001
Location: Bend Oregon
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Part # needed...
I recently had my injection pump gone through and I need the part number or numbers for the throttle rod. I think there is a kit for these items through cummins that has all the items in it. I thought at onetime I had the numbers somewhere for the kit but my paper management is poor at best.
I actually have new ends but need the rod number and ball stud that goes on the the throttle linkage.
Pump was leaking through at the plate opposite the KSB solinoid. Pump had to be taken off anyway so I had them rebuild it. Runs good and no leaks now.
Thanks in advance.
Jim
I actually have new ends but need the rod number and ball stud that goes on the the throttle linkage.
Pump was leaking through at the plate opposite the KSB solinoid. Pump had to be taken off anyway so I had them rebuild it. Runs good and no leaks now.
Thanks in advance.
Jim
Thread
Thread Starter
Forum
Replies
Last Post
NoSparkplugs
1st Gen. Ram - All Topics
5
06-24-2009 07:08 PM
77machomopar
1st Gen. Ram - All Topics
2
01-24-2008 05:30 AM