Old Moog vs. new stuff....
#1
Old Moog vs. new stuff....
Hi all, been reading and seems like there has been a change of suppliers on the moog parts? I'm about to replace my tie rod ends and would like the best I can get.
I went to the first parts house and had them bring out both brands of moog and their house brand. House brand=Tiwan= me and no thanks
Second was the moog and now they say "Assembled" in the usa.
I went to three different stores checkin around and finally found some in a yellow box (with dust) and say federal mogual on them. Also say "Problem solver". Are these the good 'ol parts that moog is known for?
Thanks
I went to the first parts house and had them bring out both brands of moog and their house brand. House brand=Tiwan= me and no thanks
Second was the moog and now they say "Assembled" in the usa.
I went to three different stores checkin around and finally found some in a yellow box (with dust) and say federal mogual on them. Also say "Problem solver". Are these the good 'ol parts that moog is known for?
Thanks
#2
Maybe.
I just went through this on the wife's Durango. Moog Problem Solver parts for both upper control arms/ball joints and one tie rod end. One ball joint and the tie rod end are toast within a year. These components did not come in a yellow box.
Thread
Thread Starter
Forum
Replies
Last Post
305motorsgt
24 Valve Engine and Drivetrain
15
07-17-2012 07:59 PM
Dodgezilla
Suggestions, Comments and Site Questions
5
11-06-2011 04:13 AM
chariotdriver
Fuels / BioDiesel / Diesel Prices
10
10-18-2008 10:50 PM
pet05
3rd Generation Ram - Non Drivetrain - All Years
1
06-14-2006 10:00 PM