Non IC/ 9mm Heads
01-02-2006, 11:46 PM
#16
Originally Posted by jleonard
Yes by all mean do your work to the 7mm head.
Cummins made a product improvement by changing from the 9mm to 7mm. Take advantage of that. They did it for a reason. To handle more heat.
Plus all of the performance injectors are 7 mm.....then you can take advantage of that plus have all the washer thickness options.
Jay
Cummins made a product improvement by changing from the 9mm to 7mm. Take advantage of that. They did it for a reason. To handle more heat.
Plus all of the performance injectors are 7 mm.....then you can take advantage of that plus have all the washer thickness options.
Jay
01-03-2006, 02:16 AM
#17
Registered User
Originally Posted by rockjeep73
Can you use the 9mm injector adaptors with any injector for the 7mm head? Or is that just for POD's?
Can't go the other way. Later head (smaller 7mm bores) big 9mm injector= NO.
Bigrag, varying injector washer thickness can reduce smoke from the POD's at idle, get the tip closer to the piston bowl. I'm sure more, someone else will have to chime in, its late.
01-03-2006, 04:29 PM
#18
Adminstrator-ess
Carmyne, AFAIK the POD's are the only injectors that need thinner washers to run cleaner. As long as you're not putting out a constant haze at idle you can't be too far off.
Thread
Thread Starter
Forum
Replies
Last Post