1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

New injection pump trouble help please

Thread Tools
 
Search this Thread
 
Old 12-11-2010 | 08:39 AM
  #1  
Seeyaby's Avatar
Thread Starter
Registered User
 
Joined: Nov 2010
Posts: 25
Likes: 0
New injection pump trouble help please

Well i had a new injection pump put on
drove it about 20 miles and it just died and
will not start back. Pulled the fuel saftey plunger out
and still no start . Fuel it as each injector . Fuel filter
is full and clean. Man i need this truck on the
road ... Need advise please .
The truck is a 1992
Old 12-11-2010 | 09:00 AM
  #2  
Richie O's Avatar
366 Spring Chicken
 
Joined: May 2008
Posts: 2,105
Likes: 3
Call the shop that put it on. Is it a " rebuilt " pump?
Old 12-11-2010 | 09:02 AM
  #3  
Seeyaby's Avatar
Thread Starter
Registered User
 
Joined: Nov 2010
Posts: 25
Likes: 0
ya a rebuilt
Old 12-11-2010 | 09:27 AM
  #4  
Richie O's Avatar
366 Spring Chicken
 
Joined: May 2008
Posts: 2,105
Likes: 3
Then they should stand behind parts and labor. 20 miles should be within warranty.

A buddie with an old truck of mine has been 2 months waiting for his truck to be fixed. He got a new pump and injectors for 1800 bucks and it ran for a few minutes. He is still fighting with them but has made some progress.
Old 12-11-2010 | 06:24 PM
  #5  
thrashingcows's Avatar
Registered User
 
Joined: Mar 2010
Posts: 7,235
Likes: 1,334
From: Prince George, BC
Hope they are a reputable shop and stand behind there work. You say you have fuel at the injectors...but how much. Is it a big forceful spray, or just a lot of fuel? What were you doing when it died?
Old 12-12-2010 | 12:01 AM
  #6  
Seeyaby's Avatar
Thread Starter
Registered User
 
Joined: Nov 2010
Posts: 25
Likes: 0
Just a little fuel at the injectors
I was slowing down to turn around
when it died..
I think the injection pump is dead
with 20 miles on it
Old 12-12-2010 | 12:09 AM
  #7  
thrashingcows's Avatar
Registered User
 
Joined: Mar 2010
Posts: 7,235
Likes: 1,334
From: Prince George, BC
Maybe the key did not get into place between the timing gear and the IP shaft. I know they can be a PITA to get lined up properly.
Old 12-12-2010 | 09:06 AM
  #8  
dzl_damon's Avatar
Registered User
 
Joined: Nov 2007
Posts: 1,816
Likes: 0
From: Maine
Originally Posted by thrashingcows
Maybe the key did not get into place between the timing gear and the IP shaft. I know they can be a PITA to get lined up properly.
That's what I'm thinking. WHen I sheared my key, I was getting very very little amounts of fuel out of 2 injectors. You should have a decent little amount each time.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tommurray
12 Valve Engine and Drivetrain
5
02-23-2014 11:38 AM
InjuredOften
1st Gen. Ram - All Topics
2
01-21-2011 06:41 PM
bakerroc
1st Gen. Ram - All Topics
9
11-13-2007 07:46 PM
cumminsdriver635
24 Valve Engine and Drivetrain
12
05-04-2005 10:25 PM
RamHunter01
HELP!
5
02-02-2004 09:51 PM




All times are GMT -5. The time now is 08:47 AM.