Need help on ID'ing a turbo.
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: Waycross, GA
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
Need help on ID'ing a turbo.
Friend of mine has a toter home for his race car. It has a 12 vlave in it, and the turbo started squeeling this past weekend. I have not been over to see this home yet as it was a recent acquisition. I hope to get over there sometime this week to see what it has on it.
the truck is a
1995 FL70 its a 230HP 5.9
anyone have any idea as to what turbo it mihgt have on it without looking. hehe
the truck is a
1995 FL70 its a 230HP 5.9
anyone have any idea as to what turbo it mihgt have on it without looking. hehe
#4
Registered User
#5
Registered User
Join Date: Dec 2006
Location: Jonesboro, TEXAS
Posts: 1,269
Likes: 0
Received 0 Likes
on
0 Posts
A FL70 is were I got my HX35-14cm, but I have also seen them with WH1C's but have never seen one with a 12cm housing. Not saying thay don't use them but I have worked on a lot of them and they all had 14cm or 16cm. At that HP I bet it has a 14cm thats the HP mine came off of. I got the 5.9 and the HX for free. I love workin at a semi wrecking yard in my spare time for a friend.
#7
Registered User
A FL70 is were I got my HX35-14cm, but I have also seen them with WH1C's but have never seen one with a 12cm housing. Not saying thay don't use them but I have worked on a lot of them and they all had 14cm or 16cm. At that HP I bet it has a 14cm thats the HP mine came off of. I got the 5.9 and the HX for free. I love workin at a semi wrecking yard in my spare time for a friend.
I too love my local semi wrecking yards! It's my monthly therapy.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jan 2005
Location: Waycross, GA
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys, it was a WH1C, we got it off, and he took it to a diesel shop and just bought a whole new setup. I didn't even think to check the exhaust housing size once I got it off, after trying to get that friggin back nut off that mounts the turbo to the manifold, i didn't care what size it was..
#9
Registered User
Join Date: Dec 2006
Location: Jonesboro, TEXAS
Posts: 1,269
Likes: 0
Received 0 Likes
on
0 Posts
No bgilbert it is cast into the inside of the housing. P.S. The WH1C is just as good as the HX35, they both have a 56mm compressor the housing just connects to the center section in a different way. And yes it is like therapy, I use to be up there almost every day for about 9 months while my friend that worked there and I built him a Intermatinal 4900 4door 6x6 from the ground up with a 8.3 Cummins and a 13spd Fuller and to many other parts to list. We had the keys to the place and could have almost any thing we wanted for little or no $$$$. Those were the good ol days.
Thread
Thread Starter
Forum
Replies
Last Post
John Rodriguez
Performance and Accessories 2nd gen only
8
02-23-2003 02:42 PM