Made the '92 do something.
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: North Idaho
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Made the '92 do something.
Went and drove a 100miles to go get a brush hog for one of my tractors on sat. Decided to haul some scrap iron to pay for fuel.
I hauled 1400lbs - truck sits pretty much level Truck was a hair over 6000 with almost a full tank of fuel.
Its got 3.54's in the rear and 4.10's in the front yet - I need to dig my other 60 out and swap it. I do really like the different gears better then my 3.07's and no OD or 4.10's it had. It did abit over 18mpg
I hauled 1400lbs - truck sits pretty much level Truck was a hair over 6000 with almost a full tank of fuel.
Its got 3.54's in the rear and 4.10's in the front yet - I need to dig my other 60 out and swap it. I do really like the different gears better then my 3.07's and no OD or 4.10's it had. It did abit over 18mpg
#3
Registered User
i just did metal today and it is as follows, (oregon)
Dirty cast at 18 cents a lb.
brass 92 cents a lb ( i made good money there today)
Aluminum 41 cents a lb
dirty aluminum 16 cents a lb...
and i turned 900 lbs of clean cast for 72 dollars.
Dirty cast at 18 cents a lb.
brass 92 cents a lb ( i made good money there today)
Aluminum 41 cents a lb
dirty aluminum 16 cents a lb...
and i turned 900 lbs of clean cast for 72 dollars.
Thread
Thread Starter
Forum
Replies
Last Post
ramdez
3rd Gen High Performance and Accessories (5.9L Only)
11
12-28-2009 03:55 PM
GrumpyTX
3rd Generation Ram - Non Drivetrain - All Years
1
10-10-2007 02:29 PM
NJMurvin
3rd Generation Ram - Non Drivetrain - All Years
13
04-12-2005 05:15 PM