1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Latest trip with 9.5 ft cabover camper 15.9mpg

Thread Tools
 
Search this Thread
 
Old 09-22-2005, 10:07 PM
  #1  
DJ
Registered User
Thread Starter
 
DJ's Avatar
 
Join Date: Jan 2002
Location: San Francisco area
Posts: 314
Likes: 0
Received 0 Likes on 0 Posts
Latest trip with 9.5 ft cabover camper 15.9mpg

Just got back from a month long vacation trip. Went from Ca to Nevada, Utah, Colorado, South Dakota, Wyoming, Idaho, Oregon and back home. Total miles 5156 MPG 15.9. Not too bad for hauling a 9.5 ft Lance camper. Got lots of work to do before trying another trip. Clutch is acting up and the trans or transfer case is getting really noisy. Makes a really bad tinny rattle when it is hot and under a load like all the gears are loose on the shaft and rattling around. It works ok just drives me crazy having to listen to it. I bought Diesel for $2.59 a gallon in one place then went to the mountains for a few days. When I came back it was $3.03. I had to back off the fuel a half turn once I got about 5000 feet up it was smoking way too much. Took a couple days to get everything dialed in and it ran great over the 12000 ft pass in rocky mountain nat park. Just had to brag about this great running Cummins.
Old 09-22-2005, 10:18 PM
  #2  
Registered User
 
stillsmokin's Avatar
 
Join Date: Aug 2005
Location: Nebraska
Posts: 319
Likes: 0
Received 0 Likes on 0 Posts
Yeh, that trans noise is the same in my truck. I noticed mine goes away with the clutch disengaged. noisy in everything even nuetral. No hard shifting or hop out though. Is yours the same? I think that the input bearing is the culprit. But have heard of problems with the stock clutch too. I have to pull mine soon for the south bend OFE clutch install. Anybody had this problem out there chime in.
Old 09-23-2005, 10:19 AM
  #3  
Registered User
 
andyr354's Avatar
 
Join Date: Jun 2003
Location: Northern KS
Posts: 818
Likes: 0
Received 0 Likes on 0 Posts
mine is rattling after a colorado trip as well! Bearings and synchros on the way from Standard Transmission since they are the only place that would tell me the brand of bearings in the kit (Timken).

How was colorado this time of year? Aspens turning yet?
Old 09-23-2005, 04:07 PM
  #4  
Registered User
 
cdodgeguy's Avatar
 
Join Date: Sep 2004
Location: modesto, ca
Posts: 133
Likes: 0
Received 0 Likes on 0 Posts
great!

First off, nice rig DJ!
Love the color, and of course its a 93'! hehe!
Anyhow, that is good mileage. Mine is a 93' club cab D250 AT and I just finished the tank out with 489 miles (with a gallon or 2 in reserve) and managed a 21.2 mpg combined tankful w/o pulling or carrying. However, when I pulled my 30' 5th wheel last month, I managed a respectable 13.7 mpg @ 60 mph and my trailer weighs in at over 8500 lbs! Now, that I must say is great mileage. I got even better coming back!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TheFog
3rd Gen Engine and Drivetrain -> 2003-2007
17
04-24-2006 09:18 AM
big jimmy
Performance and Accessories 2nd gen only
6
02-15-2006 02:24 PM
TomJ
Towing and Hauling / RV
14
04-03-2005 11:35 AM
Old Fart
Towing and Hauling / RV
3
05-16-2003 09:15 PM



Quick Reply: Latest trip with 9.5 ft cabover camper 15.9mpg



All times are GMT -5. The time now is 01:07 PM.