Just spent a few $$$k, but need help spending more....Aurora 4000???
#1
Registered User
Thread Starter
Join Date: May 2005
Location: Katy, TX off north Mason Road.
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
Just spent a few $$$k, but need help spending more....Aurora 4000???
Just finished ordering the Scheid built VE, HG, studs, a few other odd little parts. Hope they come in by friday so I can spend the weekend getting her back up and running. When I went to order the Aurora 4000 turbo though, all I can find is one for the 03-07CR cummins. Is this the same one I need? I want to get it ordered ASAP so it all comes together at the same time.
Also depending on how she runs with the new pump and turbo, it MAY make enough power, or may need a new set of injectors. Whats the highest HP made to date with DDP4's?
Also depending on how she runs with the new pump and turbo, it MAY make enough power, or may need a new set of injectors. Whats the highest HP made to date with DDP4's?
#3
Registered User
Thread Starter
Join Date: May 2005
Location: Katy, TX off north Mason Road.
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered User
Join Date: Oct 2008
Location: Dallas, GA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
I was just curious. You don't see ATS chargers too much in the 1st gen world.
#5
Registered User
I won't deal with ATS because I haven't had good experience in the time(s) I have dealt with them. I won't speak about their products, only their service. I wasn't impressed.
As for turbos, I'm hoping garrett makes a gtx wheel for the gt3788r some day, and then I wanna run garrett twins and see how it pans out for me. they seem like very first gen friendly turbos because of their quick spooling and the relatively low rpm of the ve... some day... hopefully... it'll happen.
As for turbos, I'm hoping garrett makes a gtx wheel for the gt3788r some day, and then I wanna run garrett twins and see how it pans out for me. they seem like very first gen friendly turbos because of their quick spooling and the relatively low rpm of the ve... some day... hopefully... it'll happen.
#6
Registered User
Thread Starter
Join Date: May 2005
Location: Katy, TX off north Mason Road.
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
Just spoke to ATS and got everything ordered. Should be here next week.
That puts me over the $5k mark yesterday and today. Is this old truck worth all the money and effort? I say YESSSSS.......hahaha
I should be able to get all the parts in and on the truck and running within the next 2 weeks. Depending on when my back surgery gets set up I may have enough time to get it on the dyno and make some runs for 12's before I'm laid up.
That puts me over the $5k mark yesterday and today. Is this old truck worth all the money and effort? I say YESSSSS.......hahaha
I should be able to get all the parts in and on the truck and running within the next 2 weeks. Depending on when my back surgery gets set up I may have enough time to get it on the dyno and make some runs for 12's before I'm laid up.
Trending Topics
#8
Registered User
Thread Starter
Join Date: May 2005
Location: Katy, TX off north Mason Road.
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
#12
Registered User
Thread Starter
Join Date: May 2005
Location: Katy, TX off north Mason Road.
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
Yes its 63mm titanium compressor. The WG version is $2100. Should spool very fast and be nearly unbreakable. Support over 600whp on fuel and much higher on nitrous. Compressor map goes over 70psi before it becomes inefficient. I couldnt find another turbo that even came close to what this single will do.
#14
Registered User
Join Date: Jan 2009
Location: Bountiful, Utah
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
dont forget ATS's warranty is in that price, they have a dang good warranty and I've been happy with my ATS turbos. You cant hurt them, they are well built and run well. Should be an awesome single