June 9th the Date of the 1st Gen Meet! Kentucky
#16
Its still a little far off for me to know. I going to indy the week before and don't know if work will be happy with me wanting two sats in a row off. But I will try my darndest to go.
#18
Registered User
I will make up a map soon to display, So far I have 16 trucks lined up for the dyno I need 27 to bring the dyno here. Remember $75.00 for three dyno pulls per truck. There are more people coming then we expected, so there may be a small fee to eat at the pig roast,but it will be all u can eat! An a place to by drinks 5o cents. Thanks
I thought you just hook up and run up through the RPMs while it tries to hold you back? is it it that much different than pulling a laod etc?
Consider this a teachable moment .
#19
Registered User
Thread Starter
Join Date: Nov 2005
Location: Flemingsburg Kentucky
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
Its the same as pulling a load on black top, U have no worries unless you trucks runs hot but your can set a limit on what u want them to run.
#21
Registered User
Join Date: Mar 2006
Location: Port Crane (Binghamton) NY
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
#25
Registered User
3 consecutive pulls on the dyno. You're strapped down and that takes awhile, usually each truck takes 15 minutes to setup and dyno. Then with other trucks in line, you can't run once, pull off, run again, pull off etc.
#26
Registered User
Join Date: Apr 2005
Location: Bloomington, IN
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Understood. i was just thinking. I should be getting some new injectors around then, and with it being an all day event I was thinking about getting a baseline, then installing the injectors and rerunning to see the gain. They always do that on "Horsepower" on Spike tv. I had delusions of grandeur.
#27
Registered User
Join Date: Mar 2006
Location: Port Crane (Binghamton) NY
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Understood. i was just thinking. I should be getting some new injectors around then, and with it being an all day event I was thinking about getting a baseline, then installing the injectors and rerunning to see the gain. They always do that on "Horsepower" on Spike tv. I had delusions of grandeur.
#28
Adminstrator-ess
Getting a bit off topic here, but most shops that have a dyno will sell you dyno time by the hour. You get strapped down and the dyno is yours for however much time you paid for. The dyno closest to me wants $125/hr - unfortunately the lift to get you up on the dyno is too short for a long bed club cab.