I've had enough! now its missing
#18
Did you have the banjo fitting off the return line leaving the IP??? its different.. it has a VERY small hole in it for pump case pressure....
You could have the line colapsing in the tank.. but if you still have any pressure at the IP.. then that's out...
Make sure the return line isn't pluged somewhere....
Its not looking too good...
Bryan
You could have the line colapsing in the tank.. but if you still have any pressure at the IP.. then that's out...
Make sure the return line isn't pluged somewhere....
Its not looking too good...
Bryan
#19
Registered User
Originally Posted by lovemysan
Anybody got any ideas besides the IP.
#20
Registered User
Thread Starter
Join Date: Oct 2004
Location: Kansas City, MO
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bgilbert
Sorry to bring this back to top, but I wanted to let everyone know the problem was the injection pump. Got my spare pump on and running. Runs great, no more misses. Only problem now is the slop-o-matic trans and the open diff. I went sideways leaving the alley behind my garage for a test drive . Now gotta get that PDR35 installed and start researching converters.
Thread
Thread Starter
Forum
Replies
Last Post
roughstock
24 Valve Engine and Drivetrain
16
03-25-2009 10:04 AM
Smkn600CTD
3rd Gen Engine and Drivetrain -> 2003-2007
7
12-09-2006 08:50 AM
barracuda
24 Valve Engine and Drivetrain
14
09-10-2004 07:53 AM