ive got the shakes
12-03-2009 | 08:21 PM
#18
Registered User
Joined: Dec 2005
Posts: 52
Likes: 0
Check the drive shafts, can shake if out of balance.. Also check the pinion angle of the drive line.. Make sure the yoke is still inline with the drive shaft.. I had a lifted jeep that did the exact same thing, and had to put shims under the rear springs.
good luck.
good luck.
Thread
Thread Starter
Forum
Replies
Last Post
12valvin
3rd Gen Engine and Drivetrain -> 2003-2007
5
08-10-2011 10:24 PM
blowinsmoke1
Performance and Accessories 2nd gen only
21
05-04-2010 07:00 PM
BossHogg
3rd Gen High Performance and Accessories (5.9L Only)
28
09-13-2007 09:54 PM
sajigore
3rd Generation Ram - Non Drivetrain - All Years
17
07-02-2005 07:36 AM