Injector tip/body tq spec
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: Bountiful, Utah
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Injector tip/body tq spec
Well I got my stockers in pieces, got some shims, and UPS left a note on my door today so I just need to track down my tips from them tomorrow and get them all together. Just wonderin what the tq spec is on the injector body nut that holds the tip tight? And isn't the injector hold down nut when installing them in the truck 40 or 44 ft lbs? Thanks in advance
#2
Registered User
Injector hold down nut is 44ft lbs.
However, I found that to be slightly light. I ended up torquing to 55ft lbs to seal them. This was with new copper washers though.
However, I found that to be slightly light. I ended up torquing to 55ft lbs to seal them. This was with new copper washers though.
Thread
Thread Starter
Forum
Replies
Last Post
jimbo486
1st Gen. Ram - All Topics
8
04-07-2023 04:20 AM
itr.#1446
3rd Gen High Performance and Accessories (5.9L Only)
1
05-10-2008 07:30 PM
RedRotors
Performance and Accessories 2nd gen only
4
06-05-2005 08:51 PM