I took my heap to the track
#1
Registered User
Thread Starter
Join Date: Apr 2007
Location: Southern New Jersey
Posts: 4,062
Likes: 0
Received 0 Likes
on
0 Posts
I took my heap to the track
Yesterday a few of us went to the track and I ran my heap. I went 14.60 but I was still fighting traction issues. It was a good night though there were 6 first gens that ran and we all had a lot of fun.
#4
Registered User
Join Date: Jan 2008
Location: Quinton, New Jersey (middle of nowhere)
Posts: 7,547
Likes: 0
Received 2 Likes
on
2 Posts
We're all friends and went down together after meeting at our house, we were smoking up like 4 lane highways
With my 91.5 in 4x4 and fighting clutch slippage I ran a 16.7 @84 - using 1st....Once i got it to grab in 5th it took off. not a bad MPH....
Dad- 93 D250 5 speed open rear, pump tweaks only/gov. spring--- 15.7 @ ??
Joe (not on forum)- 90 D250 727 Locker in rear, HE351 and pump mods/3200 spring- 15.07 (would have went 14's but turbo boot popped off at 47psi
Joe's brother in a 90 D250 727 with a locker and nothing but pump tweaks and 366 spring was running consistent 16.3 @ 84 ---it wouldn't go any faster for some reason
and my buddie's 90 W250 727 with no spring and only timing advance and a ddppin went 16.8 haha--gotta get a spring in it
With my 91.5 in 4x4 and fighting clutch slippage I ran a 16.7 @84 - using 1st....Once i got it to grab in 5th it took off. not a bad MPH....
Dad- 93 D250 5 speed open rear, pump tweaks only/gov. spring--- 15.7 @ ??
Joe (not on forum)- 90 D250 727 Locker in rear, HE351 and pump mods/3200 spring- 15.07 (would have went 14's but turbo boot popped off at 47psi
Joe's brother in a 90 D250 727 with a locker and nothing but pump tweaks and 366 spring was running consistent 16.3 @ 84 ---it wouldn't go any faster for some reason
and my buddie's 90 W250 727 with no spring and only timing advance and a ddppin went 16.8 haha--gotta get a spring in it
#7
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
I want to see the proof !
J/k
That's pretty quick considering I had a 68 barracuda with a 340 that did around the same numbers out of the factory.
T.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Apr 2007
Location: Southern New Jersey
Posts: 4,062
Likes: 0
Received 0 Likes
on
0 Posts
I don't have a video we were all having too much fun racing to bother with video lol. I do have a time slip though I will try to post a pic of it.
#9
1st Generation Admin
Good times!!
That mess gets addicting. Trying to best your last ET. Then something breaks! DOH!!
I was recently trying to get into the high 7's in the 8th. I think I busted the output shaft! DOH!!
That mess gets addicting. Trying to best your last ET. Then something breaks! DOH!!
I was recently trying to get into the high 7's in the 8th. I think I busted the output shaft! DOH!!
#14
Registered User
Thread Starter
Join Date: Apr 2007
Location: Southern New Jersey
Posts: 4,062
Likes: 0
Received 0 Likes
on
0 Posts
I made 3 runs first run 0 psi launch and the truck went 14.74 second run was 6psi and went 14.64 the third run was 8psi and it went 14.80. The last run it spun bad and shifted into second real quick.