High Flow Banjo Bolts
07-14-2005 | 07:57 PM
#16
Registered User
Joined: May 2003
Posts: 758
Likes: 0
From: Colorado
I installed the banjo bolts. I could not tell you any difference in pressure because I could not hook up a gauge till I got the bolts
However, on a first gen, I have heard you cant go over 13 PSI or you could blow seals in the pump. I guess it is most inportant to have good volume.
I dynoed 332 and 794, and never go under 5 PSI even pulling a long grade at WOT.
The bolts are not expensive. I would get them to be on the safe side. Cant hurt.
No more Wildcat? I guess Im a bit behind on current events
However, on a first gen, I have heard you cant go over 13 PSI or you could blow seals in the pump. I guess it is most inportant to have good volume.
I dynoed 332 and 794, and never go under 5 PSI even pulling a long grade at WOT.
The bolts are not expensive. I would get them to be on the safe side. Cant hurt.
No more Wildcat?
I guess Im a bit behind on current events
Thread
Thread Starter
Forum
Replies
Last Post
w4xtc
Performance and Accessories 2nd gen only
13
06-06-2003 04:43 PM