HE351CW Installed and tested
03-28-2010, 11:37 AM
#16
Registered User
03-28-2010, 04:54 PM
#17
Registered User
Join Date: Jan 2009
Location: Bountiful, Utah
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I could hit 40 lbs when i first put my he351 on too with my stock sticks. If you cant get the wastegate to work, I used a spring (actually the J-hook off the old hy35) and used it so the wastegate would run off drive pressure, and it was opening around 33 lbs. Just an idea if you cant get the wastegate to work. But I've noticed on my truck that it cools a lot better with the wastegate shut.
03-28-2010, 06:12 PM
#18
I just turned my fuel down to where it wouldn't get above 30. I notice at RPMs above 2200 or so if you floor it the boost rockets up... It it nice and controllable below that. I don't have the 3200 GSK either, but that would be a terrible combo, more fuel at higher RPMs. 2600 stock spring it is for me.
04-01-2010, 09:50 PM
#19
Registered User
Thread Starter
Join Date: Oct 2009
Location: Claymont, Del and Horsham, PA
Posts: 1,830
Likes: 0
Received 1 Like
on
1 Post
i took 92smokin blacky's idea with the spring, got some from pepboys and said more about it here > Tuning the new turbo
Thread
Thread Starter
Forum
Replies
Last Post
dzl_damon
1st Gen. Ram - All Topics
1
08-10-2009 11:10 AM
Wobblin-Goblin
3rd Gen Engine and Drivetrain -> 2007 and up
13
11-28-2007 06:14 AM
KATOOM
24 Valve Engine and Drivetrain
4
04-28-2003 02:43 PM