Haisley Machine Hot Rod VE On The Way...
#1
Registered User
Thread Starter
Join Date: Oct 2008
Location: Dallas, GA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Haisley Machine Hot Rod VE On The Way...
I've got to have a new IP, so I've been shopping around and comparing flow numbers (and prices). After much research, I decided on a Hot Rod 12mm from Haisley Machine. Their pump's flow numbers are some of the best out there, and the price is right. In addition, Curt (himself) stayed on the phone with me for a half hour describing in detail what the pump did, what I needed, and what it's capabilities were. Pretty excited right now, but I will post up thoughts and opinions when it arrives.
As of right now, though, I am absolutely impressed with Haisley Machine.
As of right now, though, I am absolutely impressed with Haisley Machine.
#5
Registered User
Thread Starter
Join Date: Oct 2008
Location: Dallas, GA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
Join Date: May 2005
Location: Katy, TX off north Mason Road.
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
if they are the scheid built pumps, who sells them cheaper? The 12mm from scheid is $1300 and the 14mm is $2300. Mine fell in between because I didnt want the 4mm cam plate.
Maybe I should get a quote from Haisley and compare it to the Scheid price. Then have them price match the lower. haha
Maybe I should get a quote from Haisley and compare it to the Scheid price. Then have them price match the lower. haha
Trending Topics
#8
Registered User
Thread Starter
Join Date: Oct 2008
Location: Dallas, GA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
if they are the scheid built pumps, who sells them cheaper? The 12mm from scheid is $1300 and the 14mm is $2300. Mine fell in between because I didnt want the 4mm cam plate.
Maybe I should get a quote from Haisley and compare it to the Scheid price. Then have them price match the lower. haha
Maybe I should get a quote from Haisley and compare it to the Scheid price. Then have them price match the lower. haha
Thread
Thread Starter
Forum
Replies
Last Post