H1E turbo
09-14-2008, 10:56 AM
#1
Registered User
Thread Starter
Join Date: Dec 2007
Location: Mohrsville Pennsylvania
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
H1E turbo
I acquired a h1e turbo that needs new bearings. Is it worthwile to rebuild or are they pretty much junk. How much difference is there from a hx35 to a h1e. thanks
09-14-2008, 11:11 AM
#2
A Cal HX35 has a 54MM intake wheel. The fedral HX35 has a 56MM wheel. A H1E has a 58MM wheel.
The H1E is the early version of the HX40 series of turbo.
You can use the H1E and a H1C and make a hybred out of them. The H1E and H1C use the same shaft. Here is a link with some good reading. Enjoy.
https://www.dieseltruckresource.com/...d.php?t=215919
The H1E is the early version of the HX40 series of turbo.
You can use the H1E and a H1C and make a hybred out of them. The H1E and H1C use the same shaft. Here is a link with some good reading. Enjoy.
https://www.dieseltruckresource.com/...d.php?t=215919
Thread
Thread Starter
Forum
Replies
Last Post
wb6epp
Performance and Accessories 2nd gen only
6
04-20-2008 08:22 AM
Diesel-Dan
Performance and Accessories 2nd gen only
2
12-04-2005 01:04 PM