H1C gaskets
#1
Registered User
Thread Starter
Join Date: Oct 2005
Location: West River, SD
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
H1C gaskets
Hello everyone, I hope that your summer is going great! Anyway, I am planning on installing a wastegated 12 cm housing and I had a few questions. First, where could I get the needed gaskets at the lowest price. I saw that the High Tech Turbo website listed a kit for about $22 with shipping to my address. Would it be more inexpensive to purchase through a Dodge or Cummins dealer? Also, I assume that the actuator can be operated by being connected to the intake manifold like a boost gauge. Am I correct? Thanks for any help!
#3
Banned
Join Date: Jan 2004
Location: Cape Girardeau MO
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
I have used anaerobic sealant for the oil drain. I reuse the turbo-to-manifold gaskets twice, then replace on the third time. For the turbo elbow, I leave it connected and remove the elbow and turbo as one, disconnecting it at the boot.
The turbo drain gasket is $1 from the dealer; turbo-to-manifold gasket is $5 from the dealer or CaseIH.
Daniel
The turbo drain gasket is $1 from the dealer; turbo-to-manifold gasket is $5 from the dealer or CaseIH.
Daniel
#4
Adminstrator-ess
Thread
Thread Starter
Forum
Replies
Last Post
Alec
Performance and Accessories 2nd gen only
5
08-05-2003 02:43 PM