Go Fast parts
05-22-2008 | 03:03 PM
#16
Registered User
Joined: Dec 2007
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
From: IN
http://www.cumminsforum.com/forum/89...g-install.html Look through here.
05-22-2008 | 04:03 PM
#17
Registered User
Joined: Mar 2008
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
fuel pin
get a denny t pin, 100 bucks delivered. I got a stage 2 and love it. It's made from hardened stainless. It's got a more aggressive profile than the rest. It's cheaper, made out of better material and your money is going to a fellow enthusiast instead of just some company. there is no downside. best pin, best price, best service.
nemo451
nemo451
05-25-2008 | 05:26 PM
#18
Registered User
Joined: Aug 2007
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
From: Glenville, PA
As far as a Denny T pin goes which one is better to get for a stock truck just starting out with modifications, the stage 1 or 2? Or in other words the 250-300 HP range for an end goal and no higher then that? Thanks.
05-25-2008 | 06:05 PM
#19
Registered User
One of the many tools a 1st gen owner should have, the 90* 1/4" air angle grinder, less than $30 at Harbor Freight. That plus some roll lock scrotch brite pads, grind your own pin, you just saved $100 bucks.
Or remove your afc foot entirely and there's no need for an afc pin
.
Or remove your afc foot entirely and there's no need for an afc pin
.
05-26-2008 | 06:51 PM
#23
Adminstrator-ess
The AFC is the round thing on top of the injection pump. It controls the amount of fuel you can get when there is boost and how much boost is required to get that fuel. Parts of the AFC we mess with are the smoke screw, star wheel, and fuel pin/cone.
05-27-2008 | 11:21 PM
#24
Registered User
Joined: May 2008
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
From: ohio
The DENNY T stage II is WAY more aggresive! It has a much deeper cut to allow even more fuel than the stage I. I have ran both and they work GREAT for me!
Just send Denny T a PM and he'll hook ya up!
P.S. I had a Bully Dog pin and it was as soft as butter. Waste of money.
Just send Denny T a PM and he'll hook ya up!
P.S. I had a Bully Dog pin and it was as soft as butter. Waste of money.
05-27-2008 | 11:23 PM
#25
alwaysonDTR
Joined: Dec 2007
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
From: Keizer, oregon
Thread
Thread Starter
Forum
Replies
Last Post
EdmontonCanada
3rd Gen High Performance and Accessories (5.9L Only)
37
12-09-2009 03:18 AM
CTD_Neil
Performance and Accessories 2nd gen only
1
07-19-2005 08:13 PM