MoparMarv

I got the cover all together earlier. I went to put it on and it will not go on straight. the cover is cocked to on side on the case. I'm pretty sure its all back together right and it has new forks. any ideas?

bgilbert

You might have to slide the synchro assemblies forward or back. Line the forks up with them. Also be sure the cover is in the neutral position.

stackx2

you might have to adjust the shifting forks a little bit sise to side it might not be lighning up right

MoparMarv

Ok well tomorrow in the morning I'll see if I can get all the moons to align and finish it up.