gauge pod mount steering column
#16
Registered User
I think I can count the times on one hand that mine has been over 80!
When I was trying to locate my tach on the column, before I made it permanant, I kept moving the pod around to see what was the best for seein and not covering up vital guages... thats the only spot that never hid anything I needed to know!
When I was trying to locate my tach on the column, before I made it permanant, I kept moving the pod around to see what was the best for seein and not covering up vital guages... thats the only spot that never hid anything I needed to know!
#17
I bought the column mount and the Isspro meter will not fit entirely into the hole... it (the gauge) is about 3/4" to long..... Maybe I am doing something wrong... the light in the gauge and the prongs for the dash style mount interfere with the flush fit as seen in KRB's photo...
#18
DTR's "Cooler than ice cubes 14 miles North of North Pole" member
Join Date: Oct 2006
Location: 14mi North of North Pole
Posts: 1,797
Likes: 0
Received 9 Likes
on
8 Posts
I bought the column mount and the Isspro meter will not fit entirely into the hole... it (the gauge) is about 3/4" to long..... Maybe I am doing something wrong... the light in the gauge and the prongs for the dash style mount interfere with the flush fit as seen in KRB's photo...
#19
Registered User
Join Date: Jan 2008
Location: Quinton, New Jersey (middle of nowhere)
Posts: 7,547
Likes: 0
Received 2 Likes
on
2 Posts
well the 94-01 column pod is what is used on first gens too.get it on genos garage.However it is not what it appears to be. It is not replacing the stock one it has little stickies with it that are used to attach it to the column.We put and autometer egt in there (have to cut studs on back to fit) so when your going real fast and worrying about egt the speedo and egt are both right there.
#20
DTR's "Cooler than ice cubes 14 miles North of North Pole" member
Join Date: Oct 2006
Location: 14mi North of North Pole
Posts: 1,797
Likes: 0
Received 9 Likes
on
8 Posts
I didn't use the sticky tapes. I got some short screws and screwed the cover to the original coluum shroud. Look close in the pic I posted earlier and you will see one of the screws.
#21
Registered User
I bought the column mount and the Isspro meter will not fit entirely into the hole... it (the gauge) is about 3/4" to long..... Maybe I am doing something wrong... the light in the gauge and the prongs for the dash style mount interfere with the flush fit as seen in KRB's photo...
My Issopro fit the pod with minor modafications. I bought a spare column cover from the junk yard in case I wanted to remove the pod and return it back to stock. Drilled a hole in it for the wires to go through into the column plus the 3/16 holes for the plastic "rivits" that hold the pod onto the column cover (ofcmarc used screws in the photo). Had to cut off the mounting stud protruding from the back of the Issopro, slighly bend a spade connector and then a wrap of electrical tape to make the guage fit tight. That was it. Others said that the guage was too long and you'd have to cut the back out of the pod but they must have a different Issopro.
#24
https://www.dieseltruckresource.com/...d.php?t=173561 Great writeup here.
Thread
Thread Starter
Forum
Replies
Last Post
53 willys
3rd Gen High Performance and Accessories (5.9L Only)
18
01-06-2007 06:44 PM
chw
3rd Gen High Performance and Accessories (5.9L Only)
2
12-25-2006 04:30 PM
VueDoo
3rd Gen High Performance and Accessories (5.9L Only)
20
05-09-2004 09:07 PM