FULL LOAD DELIVERY
11-17-2002, 06:30 PM
#1
Registered User
Thread Starter
Join Date: Sep 2002
Location: Benton, Arkansas
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
FULL LOAD DELIVERY
DOES TURNING THE FULL LOAD DELIVERY ADJUSTMANT ON THE 1ST GENERATION VE INJECTOR PUMPS CUT THE PUMPS LIFE WHEN U TURN IT TO GET MORE POWER
11-17-2002, 07:29 PM
#2
Administrator
Re:FULL LOAD DELIVERY
It just depends on how far you turn the screw in. Some people say that turning the screw up until the idle goes up is as far as you wanna go if you still want to have a long lasting pump. But, MANY members including myself have taken the stop cover off of the screw and run it up to the tack weld. I have run my pump in this manner for over 80k miles with no problems.(knock on wood). However, if I had it to do over again, I would have put a set of the POD's in first. Then tuned my pump to them.
Thread
Thread Starter
Forum
Replies
Last Post
13bdarren
3rd Gen Engine and Drivetrain -> 2007 and up
6
01-27-2009 12:39 PM
stock600
12 Valve Engine and Drivetrain
14
02-25-2008 11:21 AM
West Coast
Performance and Accessories 2nd gen only
1
07-04-2007 10:25 AM
racermatt2606
Performance and Accessories 2nd gen only
0
10-05-2004 06:10 PM
j
Performance and Accessories 2nd gen only
12
11-14-2003 09:38 PM