fuel system air bleed 1993 5.9
05-21-2010, 10:25 AM
#1
Registered User
Thread Starter
Join Date: May 2010
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
fuel system air bleed 1993 5.9
Hi there,
I am new to the diesel world and messed up my first simple job. I changed the fuel filter on my 1993 5.9 and did not fill the filter prior to installation. It fire up then died after all fuel was gone in the system. I read the manuel and it said to prime the lever on the fuel pump for low pressure bleeding. I did that but still would not fire up. I know there is air in the system and needing help how to bleed so I can get rolling again. Any suggestion would be greatly appreciated.
I am new to the diesel world and messed up my first simple job. I changed the fuel filter on my 1993 5.9 and did not fill the filter prior to installation. It fire up then died after all fuel was gone in the system. I read the manuel and it said to prime the lever on the fuel pump for low pressure bleeding. I did that but still would not fire up. I know there is air in the system and needing help how to bleed so I can get rolling again. Any suggestion would be greatly appreciated.
05-21-2010, 02:58 PM
#2
Administrator / Severe Concussion Aficionado
Hi there,
I am new to the diesel world and messed up my first simple job. I changed the fuel filter on my 1993 5.9 and did not fill the filter prior to installation. It fire up then died after all fuel was gone in the system. I read the manuel and it said to prime the lever on the fuel pump for low pressure bleeding. I did that but still would not fire up. I know there is air in the system and needing help how to bleed so I can get rolling again. Any suggestion would be greatly appreciated.
I am new to the diesel world and messed up my first simple job. I changed the fuel filter on my 1993 5.9 and did not fill the filter prior to installation. It fire up then died after all fuel was gone in the system. I read the manuel and it said to prime the lever on the fuel pump for low pressure bleeding. I did that but still would not fire up. I know there is air in the system and needing help how to bleed so I can get rolling again. Any suggestion would be greatly appreciated.
Try posting up in the 1st gen forums for more help.
https://www.dieseltruckresource.com/...opics-f93.html
Welcome to the DTR and dont for get to vote for our favorite admin Madhat in this months Truck of the Month Competition.
https://www.dieseltruckresource.com/...n-t270109.html
Thread
Thread Starter
Forum
Replies
Last Post
Southern Pride
3rd Gen Engine and Drivetrain -> 2003-2007
15
03-12-2010 12:42 PM
Deadbunny
HELP!
34
03-29-2009 10:17 PM
Bad Ramer Jamer
3rd Generation Ram - Non Drivetrain - All Years
13
01-12-2008 05:38 AM