front axel question
#17
Registered User
Join Date: Jan 2005
Location: Yuba city Kalifornia
Posts: 3,899
Likes: 0
Received 3 Likes
on
2 Posts
Originally Posted by stillsmokin
The tool (4wd spindle nut socket) you need is for the 4500# dana 60 front axle, chevrolet/gmc dana 60 uses the same tool from the early 80's on up. IT IS NOT THE SAME TOOL AS THE REAR AXLE NUT SOCKET AND DON'T USE AS HAMMER AND PUNCH . For reference the 3500# front axle is the dana 44. ALL cummins and w350 gas trucks have the 60 front which is evidenced by manual locking hubs, the trucks with 44 fronts (gassers) have a vacuum central axle locking mechanism.
Any questions?
Any questions?
#19
Registered User
Join Date: Jun 2003
Location: Northern KS
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rebal
THE DANA 60 IN OUR DODGES USE A 2AND 9/16 NUT, IT IS NO SPECIAL TOOL
#20
Registered User
Join Date: Aug 2005
Location: Nebraska
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
PEOPLE, YES, CHEVY AND DODGE TOOLS ARE THE SAME (most likely ford is too) just follow danas design changes and all will be fine, OWN BOTH CHEVY AND DODGE INTERNAL 60 FRONTS, HAD BOTH APART. 77-80 chevy 60 fronts did have a different 6 pronged socket.
NO, 2 9/16 axle nut socket DOES NOT WORK ON A 60 FRONT 91-93, it is a special 4 pronged tool, the nut is not 6 sided.
NO, 2 9/16 axle nut socket DOES NOT WORK ON A 60 FRONT 91-93, it is a special 4 pronged tool, the nut is not 6 sided.
#21
Registered User
Join Date: Dec 2003
Location: Kenna, WV
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
I think I found the socket at NAPA.
I borrowed one from one of our mechanics.
I still have to check to see if it fits, once I do I will check back
Here is the link to the socket that he gave me.
Part number is K-D 3246
http://www.napaonline.com/masterpage...ock+Nut+Socket
I borrowed one from one of our mechanics.
I still have to check to see if it fits, once I do I will check back
Here is the link to the socket that he gave me.
Part number is K-D 3246
http://www.napaonline.com/masterpage...ock+Nut+Socket
Thread
Thread Starter
Forum
Replies
Last Post
Gypsyman
3rd Gen Engine and Drivetrain -> 2003-2007
18
10-02-2004 11:59 PM
JImbo1
2nd Gen. Dodge Ram - No Drivetrain
2
04-09-2003 07:46 AM