Flat fender Power Wagon 12v Cummins VE
#32
Registered User
Thread Starter
its something someone has fabbed up, it will work well for this application, the motor appears to be from a 1992 dodge truck
#33
Registered User
Thread Starter
Haven't had much time to work on this but did get the fuel tank and box off.
Got some questions for those in the know regarding nv4500 swaps. Which engine adapter plate should I use? I bought a new 2nd Gen starter, do I need a spacer?
i plan on using the nv4500 bell housing with the 13" getrag clutch
Got some questions for those in the know regarding nv4500 swaps. Which engine adapter plate should I use? I bought a new 2nd Gen starter, do I need a spacer?
i plan on using the nv4500 bell housing with the 13" getrag clutch
#34
Registered User
You want a 2nd gen adapter plate to go with that new 2nd gen starter to bolt to that NV-4500.
How do you like that Bend Pak lift? Is that the 10,000# model?
How do you like that Bend Pak lift? Is that the 10,000# model?
#35
Registered User
Thread Starter
I really like the lift, I use it a lot more then I thought I would. It's very well built and works well. The only small thing I don't like is when the arms are extended all the way with a 1ton diesel on the lift they have a bit of bow to them. Just looks bad but it's just a aesthetics thing.
Yes its a 10000lb model, here's a link to it:
http://www.bendpak.com/car-lifts/two-post-lifts/xpr-10s-168.aspx
#36
Administrator
I don't know how the Getrag 13" setup works, you should be able to easily measure from the flywheel flange to the starter ring gear on both and it should be fairly obvious if you need it or not.
#37
Banned
i know with 2nd gen adapter/starter and nv4500 clutch(12 1/4"), you do not need a spacer. with 2nd gen adapter/starter and nv5600(13") clutch, you need the spacer. unsure on 2nd gen adapter/starter and a getrag clutch.
if you do need the spacer, i've got a spare from southbend.
if you do need the spacer, i've got a spare from southbend.
#38
Registered User
Thread Starter
i know with 2nd gen adapter/starter and nv4500 clutch(12 1/4"), you do not need a spacer. with 2nd gen adapter/starter and nv5600(13") clutch, you need the spacer. unsure on 2nd gen adapter/starter and a getrag clutch.
if you do need the spacer, i've got a spare from southbend.
if you do need the spacer, i've got a spare from southbend.
#39
Registered User
Thread Starter
#40
Registered User
Thread Starter
I have a bunch of these type of welds to repair
#42
Banned
can i just come up and do work in your shop? don't worry, i'll work on your stuff, I'm just in love with that shop. i can survive solely on pizza, beer, and coffee, and i'll string my hammock up between the lift posts to sleep.
The following users liked this post:
thrashingcows (02-02-2017)
#44
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
I hear that he went up to Alaska, and now people from there are missing !!
The Donner party was scared to have him stay with them, I'm sure you will be too ! You know them people from Florida. They're all serial killers, cause that state breeds psycho serial killers who love to live in workshops, drink all your beer, coffee, and eat all your pizza. Once you stop feeding them and giving them beer and coffee, they kill you, and move on to their next beer, coffee, and pizza victim....
After a really big BBQ, that is....
#45
Registered User
Thread Starter
well I don't know how I could refuse that offer! What day do you want me to pick you up at the airport? 😀