Flat fender Power Wagon 12v Cummins VE
#166
Registered User
Mister you got some mad metal working skills.....
#167
Registered User
Thread Starter
The following users liked this post:
thrashingcows (03-25-2018)
The following users liked this post:
gyman98 (03-25-2018)
#172
Registered User
Looks like you beefed up the rear crossmember with a receiver too.
But now no room for the pintle hitch or rear PTO! Just kidding, not much need for that stuff now days.
But now no room for the pintle hitch or rear PTO! Just kidding, not much need for that stuff now days.
#173
Registered User
Thread Starter
yes, it’s a class V of some kind that came with the truck. Welded it to the rear cross member and 4-1/2” grade 8 bolts. I have a pintel that goes into the receiver but yes sadly no rear pto
#174
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
I see you've put your kids to work...
Get a look at how CLEAN that shop is !!!!
I love reorganizing my shop, cleaning it up. The next time I walk in there, it's so gratifying....
Get a look at how CLEAN that shop is !!!!
I love reorganizing my shop, cleaning it up. The next time I walk in there, it's so gratifying....
The following users liked this post:
gyman98 (03-28-2018)
#175
Registered User
I have a private mechanic in Oklahoma who does work I can't do like swapping transmissions. Then I stand around and crack jokes while he has oil dripping in his face.
I love my truck.
Edwin
The following users liked this post:
gyman98 (03-28-2018)
#176
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
The following users liked this post:
gyman98 (03-28-2018)
#177
Registered User
Thread Starter
Yep if the kids want to be able to have nice things and go on holidays they need to help out. We do quite a bit of work in our shop to subsidize our family income. The white semi was in for injector repairs, before that was a KW with 2 holes through the block
#178
Registered User
Thread Starter
Made a new tailgate, painted the bottom of the cab and test fit the box. Need to do the final work around the turn over hitch and finish the mounts then it’s off for sandblast/primer
The following 4 users liked this post by gyman98:
#179
Registered User
Thread Starter
The following 3 users liked this post by gyman98:
#180
Registered User
Thread Starter
Got the box back from blasting and prime, installed the exhaust, transfer case installed, polished the valve covers, set the cab back on the frame, made a battery holder and a electronic ebrake
The following 4 users liked this post by gyman98: