dyno saturday
#1
Registered User
Thread Starter
Join Date: Jun 2005
Location: Orient Oh
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
dyno saturday
i cant wait i will be dynoing my truck this weekend at a local dyno. anyone knwo what kind of number will be making the mods are in my sig. i am hopin for 300 hp but i think i will be a little shy. i will let u all know the outcome when i happens.
#7
Registered User
Looks like I have a very similar setup, except for the turbo.
I dynoed on a mustang dyno local in my area and we tried both with the tq locked and unlocked.
Unlocked numbers were around 160 hp/340 ft-lb.
Tq locked was 252hp/733 ft-lb.
Both runs start out from stopped, locked runs start with the switch in the locked position, dyno starts measuring at 10mph to 65 mph.
Hope that give you an Idea.
I dynoed on a mustang dyno local in my area and we tried both with the tq locked and unlocked.
Unlocked numbers were around 160 hp/340 ft-lb.
Tq locked was 252hp/733 ft-lb.
Both runs start out from stopped, locked runs start with the switch in the locked position, dyno starts measuring at 10mph to 65 mph.
Hope that give you an Idea.
Trending Topics
#8
Registered User
Join Date: May 2005
Location: Katy, TX off north Mason Road.
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
So your running all that air and fuel without an IC?
I'm guessing a little lower than the other guys, like 235-240. Closer to 275 with a good 2nd gen or Banks IC.
But thats just me and I'm still fairly new at this.
I'm guessing a little lower than the other guys, like 235-240. Closer to 275 with a good 2nd gen or Banks IC.
But thats just me and I'm still fairly new at this.
Thread
Thread Starter
Forum
Replies
Last Post
$oC@l CTD
3rd Gen High Performance and Accessories (5.9L Only)
11
05-11-2007 12:45 AM
outlawdra
Natl. and Regional Chapters / Special Events
161
04-07-2006 09:08 PM