Dragstrip Time
#1
Registered User
Thread Starter
Dragstrip Time
Just got back from Texas raceway in Kenedale had ahard time hooking truck up had to detune engine ran a 9.669 in the 1/8 mile with a 2.1 60foot time how do you think i did I no its not very fast but truck has a lot more just cant use it right now
#2
Registered User
Join Date: Nov 2007
Location: northern utah
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
good job puttin your truck out there to see what its got. i want to run a 1/4 mile someday just for fun, none very close to me. im sure you can improve with some trial and error testing.
#7
Registered User
Join Date: Jan 2008
Location: Quinton, New Jersey (middle of nowhere)
Posts: 7,547
Likes: 0
Received 2 Likes
on
2 Posts
thats about a 15.15 if it keeps pulling hard after the 1/8. I used a online calculator.
thats good but the 3.54 gears and the 727 are really holding you back past the 1/8th mile. for sure.
Our 91 did a 14.9 by the time we sold it, because we had slicks on it. still an open rear that spun even with the slicks, very stock truck
on street tires it ran a 15.5.. mods are in the vid description.
http://www.youtube.com/watch?v=viIXxW9l6ug
thats good but the 3.54 gears and the 727 are really holding you back past the 1/8th mile. for sure.
Our 91 did a 14.9 by the time we sold it, because we had slicks on it. still an open rear that spun even with the slicks, very stock truck
on street tires it ran a 15.5.. mods are in the vid description.
http://www.youtube.com/watch?v=viIXxW9l6ug
Trending Topics
#8
we ran at nhrda event in topeka ks, last month, spun the tires the whole first 1/8 for a 12 something, hooked up the second 1/8 and made it in 5.1 fo 91 mph, that first 1/8 was a scary ride, and of course my helmet was in the seat beside me, never claimed to be very smart, 4wd next time
#11
Registered User
Thread Starter
I also ran a 12.5 & smoked the dully the whole track Ihad to turn the fuel screw down quite a bit to get it to hook up I did not want to run all out because i pulled my toy trailer from MI to Tx Im down here working when i get back to MI iwill do some more work to it & turn it back up anybody running super single on a dully Ithink it would be cooooL
Last edited by sshort; 05-04-2009 at 04:57 PM. Reason: adding more
#14
Registered User
Join Date: Aug 2006
Location: Cresson/Stephenville Texas
Posts: 2,436
Likes: 0
Received 0 Likes
on
0 Posts
Me and my buddies go out there every now and then. Would be good to see another 1st gen there. PM me or find me in chapter 42 before next time you go out there. I can't run cuz my clutch but I can sure watch!