Door Locks
#16
Registered User
WD-40 needs to be used with caution
I had several homeowners who used wd on their window frames. The frames, several weeks later still had the wd on them, but also was covered with a layer of dust / dirt, because WD is sticky, and leaves a residue.
From what I've found, I would prefer using a lubricant that doesn't attract dirt.
I had several homeowners who used wd on their window frames. The frames, several weeks later still had the wd on them, but also was covered with a layer of dust / dirt, because WD is sticky, and leaves a residue.
From what I've found, I would prefer using a lubricant that doesn't attract dirt.
WD 40 will get a rusty sticky lock working. PB blaster is probably better. Follow it with non residue electrical cleaner spray, then graphite.
#17
Registered User
I've got silicone lubricant, Kan-O-Kroil and electrical contact cleaner in aerosol cans and I also have a small puff tube of graphite. I've tried the silicone lubricant on the linkage joints in the past and it seemed to free it up a little bit.
#18
Registered User
Join Date: Aug 2010
Location: Spring Creek NV
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
I was having all these same problems with my door locks a little over a year ago. I did the same thing that NJTman did and it would fix it for a while but the problems always returned. i finally got tired of messing with it and purchased new door latches and posts here. I had a friend who owns a body shop install and adjust them for me, havent had a problem since. New lock and stricker post shouldnt run more then $120 per side to your front door.
#19
Registered User
Just tried spraying lubricant, contact cleaner and then a few puffs of graphite inside the lock cylinder.
My findings are, that the lock still has to pop in order for the door to be opened. If I open the door and actuate the lock with the key, it's smooth as glass. Is my issue now in the lock/latch mechanism itself?
My findings are, that the lock still has to pop in order for the door to be opened. If I open the door and actuate the lock with the key, it's smooth as glass. Is my issue now in the lock/latch mechanism itself?
#20
Registered User
These guys have new latches...
http://www.jimsautoparts.com/nos_truck_parts.htm
http://www.jimsautoparts.com/nos_truck_parts.htm
Thread
Thread Starter
Forum
Replies
Last Post
nomad65
3rd Generation Ram - Non Drivetrain - All Years
1
08-20-2007 06:01 PM
Bradtothebone
2nd Gen. Dodge Ram - No Drivetrain
11
05-21-2003 10:31 PM