Cutting MWE slot
08-25-2009 | 07:18 PM
#1
Thread Starter
Registered User
Joined: Jun 2008
Posts: 531
Likes: 17
From: Rocket City USA - AKA Huntsville, AL
Cutting MWE slot
Does anyone have specifics on how (where, how deep, etc.) the MWE slot should be cut into the compressor housing? I put a 56mm on mine and I've got some chatter I want to get rid of.
Thanks
Thanks
08-26-2009 | 01:10 PM
#2
Thread Starter
Registered User
Joined: Jun 2008
Posts: 531
Likes: 17
From: Rocket City USA - AKA Huntsville, AL
Okay... no help, so far...
How about this? Anyone who has a compressor with an MWE already cut in it, can you measure how far in front of or behind the front edge of the compressor wheel it is? That should tell me what I need to know.
Thanks,
Tom
How about this? Anyone who has a compressor with an MWE already cut in it, can you measure how far in front of or behind the front edge of the compressor wheel it is? That should tell me what I need to know.
Thanks,
Tom
Thread
Thread Starter
Forum
Replies
Last Post
ptgarcia
3rd Gen High Performance and Accessories (5.9L Only)
9
10-30-2007 11:55 AM
Alec
Performance and Accessories 2nd gen only
5
08-05-2003 03:43 PM