td3620

where you get your cab mount bushing ? I need a set for my 92 ex.cab.
How hard was it to cut out floor for 4x4 shifter?

thrashingcows

Cab bushing can be got pretty much anywhere. It's the same kit from 72-93 I believe, and covers reg cab, club cab, crew cab.

Energy Suspension 5.4101G

The tunnel I got out of a ramcharger. So it already had the cut out for the transfer case shifter.

mknittle

I would guess it is easier than replacing the transmission hump.
I need a set too.
http://www.summitracing.com/search?S...sion%205.4101G

thrashingcows

Yesterday I installed the aluminum upper wheel opening mouldings from the 84 side trim. I have been debating if I should run the 91-93 big black wheel opening flares. But after my last junk yard run and seeing the dodge rams and dakota with front and rear wheel rot due to these types of flairs, I couldn't justify putting them back on. Especially since this is my daily drivers.

I also installed my aluminum mud flaps. And today I gave Ol' Patch's a bath and some fixes hear and there, mostly where water was leaking in, and some surface rust had started.

td3620

okay.thank you

thrashingcows

Well I have started a thread about my issues with Line-X. Here is the link...

https://www.dieseltruckresource.com/...x-t319970.html

thrashingcows

Guess the mods did not like this........they removed my thread. Maybe LineX is a site advertiser, or sponsor?

flyboy129

Interesting. With all of the photo and contact proof you have, this wasn't just a bashing thread. Maybe we should all contact the mods with grievances? See if there is an advertiser with too much power. Seems like if line x was an advertiser, a good site would say "Hey, we have a long time member with an issue." Ah, the power of generated income...

thrashingcows

If I complain about it, All that would happen is me getting banned.

A favorite quote, "When profit and morality compete...it's seldom that profit looses."

69HemiGTX

I've never seen any Line-X ads here. I guess the PC police even have a place here.

OK, back to our regularly scheduled Crew Cab project.

oliver foster

Seemed like your Line X problem was pretty straight forward.

They did NO, NONE, NOTHING for prep work and their stuff peeled off like a sun burn…

I am surprised they are not helping you out.

Alec

I do not think your thread should have been removed.

mknittle

So am I looks like one bad apple is spoiling the barrel.

StealthDiesel

^^I totally agree.

When a forum becomes too moderated and too censored, is when a forum dies...

Lary Ellis (Top)

No LineX is NOT a Sponsor so that had nothing to do with it being removed.

The Forum Rules you agreed to when registering on the site are very explicit about posting with nothing but the intent of bashing others....Your thread started out as informational and then you posted this "I am posting this on every on-line forum I frequent, with the hopes that the negative publicity will bring these parties out of the wood work"

In your OWN words you were simply trying to force them into taking care of the problem for you by bashing them here.....then you posted this..."Well I don't want any bed liner in my truck box anymore. I'm put off on those now, and will never get one installed, regardless of who is doing the work.

I'm hoping they will refund me my purchase price. Heck I can return the liner...I still have it in several garbage bags. "

So now you took away any real hope of a realistic remedy as you now want cash instead of your truck fixed. Everyone knows that when a company warranties a product they do so by fixing the problem not writing out checks.

The proper solution was to allow them to prepare the bed properly this time and put a new liner in it at their cost....but you posted where even they can read it that you do not want that thus seriously limiting their ability to fix the issue.

In short your thread was intended from the start to be used as leverage against a company that because of Forum Rules regarding Vendors, could not respond to your allegations making it nothing more than a bash thread.

As I told you when the thread was removed, it is obvious they did not do the job right and you deserve to have it fixed PROPERLY....but a thread here that is just placed as a means to bash a company into giving you what you want will never be allowed to stay on this forum.

You have a legitimate complaint you just took it beyond the proper boundary's of this forum.