1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Could some one take a picture of factory tach plug in

Thread Tools
 
Search this Thread
 
Old 07-01-2009 | 09:32 PM
  #1  
roxxx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,115
Likes: 0
From: North of Calgary Alberta
Could some one take a picture of factory tach plug in

I have being under the dash for 2 hours I know i have one becuse the sensor is on the harmonic balancer i traced it to the fire wall but for the love of What ever i cannot find the plug reason i am hunting is cuz i was given this Attachment 28507
It looks like it might be frozen but not sure
Old 07-01-2009 | 10:12 PM
  #2  
921stgen's Avatar
Registered User
 
Joined: Jan 2008
Posts: 154
Likes: 0
From: Springfield, Ohio
In the 4th picture down you can see it, it has 4 thin male spade terminals in it. Mine was taped to that wiring harness.
https://www.dieseltruckresource.com/....html?t=173561
Old 07-01-2009 | 10:13 PM
  #3  
Crossy's son's Avatar
Registered User
 
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
Look above the emergency brake pedal area. around there. should be taped up.
Old 07-01-2009 | 11:10 PM
  #4  
roxxx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,115
Likes: 0
From: North of Calgary Alberta
yes i see that in the forth but be danged if i can see that on mine
Old 07-01-2009 | 11:24 PM
  #5  
Crossy's son's Avatar
Registered User
 
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
Your truck being a 92 would most certainly have it??

Keep looking! if its never been used then its hiding.
Old 07-02-2009 | 01:02 AM
  #6  
roxxx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,115
Likes: 0
From: North of Calgary Alberta
Originally Posted by Crossy's son
Your truck being a 92 would most certainly have it??

Keep looking! if its never been used then its hiding.
awww crap I even have my wife in there lookin too , i have had the whole cowl off the steerin wheel even the fuse box cover and the nothing. is it a different color blue or black . Like i said I know I have part of the wiring cuz I traced the censor to the wire bundle but lookin pretty bare under the dash
Old 07-02-2009 | 01:14 AM
  #7  
Mr. Big Ram's Avatar
Registered User
 
Joined: Sep 2007
Posts: 229
Likes: 0
From: Vegas
When I put mine in last month, I had to snip both plugs and hardwire it in.... trying to remember which one had what end on it. Look around for a smaller squarish plug on the truck versus the rectangular one thats on the other end... or vice versa!
Old 07-02-2009 | 01:27 AM
  #8  
roxxx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,115
Likes: 0
From: North of Calgary Alberta
Arghhh No light left have to try again tomorrow would the plug be used for something else ? i do have very small plug but it looks like its for the PCM and it is attached to the underside of the dash
Old 07-02-2009 | 01:33 AM
  #9  
Mr. Big Ram's Avatar
Registered User
 
Joined: Sep 2007
Posts: 229
Likes: 0
From: Vegas
Mine was taped up like the other poster says, but I don't think it can be used for anything else. I'll look tomorrow in my parts bucket and see if I saved the plugs I cut.
Old 07-02-2009 | 01:38 AM
  #10  
roxxx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,115
Likes: 0
From: North of Calgary Alberta
Thank you
Old 07-02-2009 | 04:22 PM
  #11  
Mr. Big Ram's Avatar
Registered User
 
Joined: Sep 2007
Posts: 229
Likes: 0
From: Vegas
Searched high and low for the darn things.... must've thrown them out. Keep looking the plug is up in there. The tach, can you post a pic of the plug it has? Might refresh my brain some!
Old 07-02-2009 | 07:44 PM
  #12  
roxxx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,115
Likes: 0
From: North of Calgary Alberta
this is it
https://www.dieseltruckresource.com/....html?t=185725
half way down page
Old 07-03-2009 | 01:27 AM
  #13  
Mr. Big Ram's Avatar
Registered User
 
Joined: Sep 2007
Posts: 229
Likes: 0
From: Vegas
Link is not working !
Old 07-03-2009 | 06:27 AM
  #14  
wannadiesel's Avatar
Adminstrator-ess
 
Joined: Mar 2003
Posts: 22,594
Likes: 17
From: New Holland, PA
Works for me.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
6.7L dodge
1st Gen. Ram - All Topics
4
03-16-2015 10:50 AM
jesussaves
1st Gen. Ram - All Topics
7
11-17-2009 07:53 PM
2500
12 Valve Engine and Drivetrain
12
10-17-2008 12:23 PM
Timmer
3rd Gen Engine and Drivetrain -> 2003-2007
9
01-11-2008 02:23 PM
Dean Snow
1st Gen. Ram - All Topics
16
09-27-2007 06:26 PM



Quick Reply: Could some one take a picture of factory tach plug in



All times are GMT -5. The time now is 09:56 PM.