Converting electronic speedo to cable drive
#16
Registered User
>>> thank you rockmike <<<
I knew surely this could be done; now I know for certain.
Thank you for posting this.
It should be "stickied".
Thank you for posting this.
It should be "stickied".
#17
Registered User
Join Date: May 2009
Location: Lancaster, Ca.
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket cruise control kits could probably still be had. My 91.5 D350 Getrag came without cruise; I installed a kit. To get the signal for speed sensing I just had to add two disc magnets at the #1 u-joint and affix a telephone pickup coil(the type you'd find at Radio Shack with a 500-ohm coil on a suction cup) in close proximity. Worked great. You might be able to modify this idea to use with the existing control. Play around with it a bit, I doubt you are gonna hurt it!
Thread
Thread Starter
Forum
Replies
Last Post
Lost Lake
3rd Gen Engine and Drivetrain -> 2003-2007
9
11-05-2018 09:14 PM
kingofdodge7131
3rd Gen Engine and Drivetrain -> 2007 and up
2
07-05-2011 06:06 PM
ted4420
Introductions / New People
2
04-26-2010 05:33 PM
Kirk T
1st Gen. Ram - All Topics
2
09-20-2006 07:19 AM
hellotbone
Performance and Accessories 2nd gen only
8
10-07-2003 06:54 AM